What to do if my Beko Ventilation Hood is not working?
If your Beko Ventilation Hood is not working, first check the fuse and restore it if blown. Ensure that the mains voltage is between 220 and 240 V. Also, verify that other appliances in your kitchen are operating correctly.
Why is the light not working on my Beko Ventilation Hood?
If the illumination light on your Beko Ventilation Hood isn't working, make sure the mains voltage is between 220 and 240 V. Confirm that the lamp switch is in the "on" position. Ensure that the appliance lamps illuminate.
How to improve air inlet of Beko Ventilation Hood?
If the air inlet of your Beko Ventilation Hood is inadequate, clean the aluminum grease filter at least once a month under normal operating conditions. Ensure the air discharge chimney is in the “on” position. If your appliance has carbon filters, replace them every 3 months under normal conditions.
General| Type | Chimney |
|---|---|
| Width | 60 cm |
| Number of Speeds | 3 |
| Noise Level | 62 dB |
| Lighting | LED |
| Filter Type | Aluminium |
| Number of Bulbs | 2 |
| Colour | White |
| Number of Motors | 1 |
| Control Type | Mechanical |
| Material | Stainless Steel |
To Next Page
