Why is the illumination light not working on my Beko HCA62640WH Ventilation Hood?
If the illumination light on your Beko Ventilation Hood is not working, ensure the mains voltage is between 220 and 240 V. Also, check that the lamp switch is in the "on" position and that the lamps of the appliance shall illuminate.
How to improve inadequate air inlet in my Beko HCA62640WH Ventilation Hood?
To improve inadequate air inlet in your Beko Ventilation Hood, clean the grease filter at least once a month under normal operating conditions. Ensure the air discharge flue is in the “on” position. For appliances with carbon filters, replace the filters every 3 months under normal conditions.
Why is my Beko HCA62640WH Ventilation Hood appliance not working?
If your Beko Ventilation Hood isn't working, start by checking your fuses and the electrical connection to ensure the mains voltage is between 220 and 240 V. Also, verify that other kitchen appliances are operating correctly.
What to do if the Beko HCA62640WH illumination light does not operate?
If the illumination light on your Beko Ventilation Hood isn't working, verify the mains voltage is between 220 and 240 V by checking the electrical connection. Make sure the lamp switch is in the 'on' position and inspect the lamps themselves to ensure they illuminate.
How to improve inadequate air inlet of Beko HCA62640WH?
To improve the air inlet of your Beko Ventilation Hood, inspect the grease filter, which should be cleaned at least once a month under normal operating conditions. Also, check the air discharge flue to ensure it is in the 'on' position. If your appliance has carbon filters, inspect them and replace them every 3 months under normal conditions.
How to troubleshoot Beko Ventilation Hood not working?
If your Beko Ventilation Hood isn't working, start by checking the fuse and restore it if needed. Ensure the mains voltage is between 220 and 240 V by checking the electrical connection. Also, verify if other appliances in your kitchen are operating correctly.
What to do if air inlet of Beko HCA62640WH is inadequate?
If the air inlet of your Beko Ventilation Hood is inadequate, inspect the aluminum grease filter, which should be cleaned monthly under normal conditions. Check the air discharge flue to ensure it is in the “on” position. If your appliance has carbon filters, inspect them and replace them every 3 months under normal conditions.
General| Type | Chimney |
|---|---|
| Width | 60 cm |
| Energy Class | A |
| Number of Speeds | 3 |
| Noise Level | 62 dB |
| Lighting | LED |
| Lighting Efficiency Class | A |
| Grease Filtering Efficiency Class | B |
| Number of Motors | 1 |
| Material | Stainless Steel |
| Filter Type | Aluminum |
To Next Page
