Why is my Beko HCA63640B Ventilation Hood appliance not working?
If your Beko Ventilation Hood isn't working, the problem could stem from a few causes. First, check your fuses, as one may have blown and needs replacing. Second, ensure the mains voltage is between 220 and 240 V by checking the electrical connection. Finally, verify that other appliances in your kitchen are operating correctly to rule out a broader electrical issue.
What to do if the illumination light on my Beko Ventilation Hood does not operate?
If the illumination light on your Beko Ventilation Hood isn't working, start by checking the electrical connection to ensure the mains voltage is between 220 and 240 V. Next, inspect the lamp switch to confirm it's in the “on” position. Finally, check the lamps themselves to see if they need replacing.
How to improve inadequate air inlet of Beko Ventilation Hood?
To improve the air inlet of your Beko Ventilation Hood: * Inspect the aluminum filter, cleaning it at least once a month under normal operating conditions. * Check the air discharge chimney to ensure it's in the “on” position. * If your appliance uses carbon filters, inspect the carbon filter and replace them every 3 months under normal conditions.
Why is my Beko HCA63640B not working?
If your Beko Ventilation Hood isn't working, there could be a few reasons. First, check your fuses and restore them if blown. Second, ensure the mains voltage is between 220 and 240 V by checking the electrical connection. Finally, verify that other appliances in your kitchen are operating correctly.
What to do if the light on my Beko Ventilation Hood doesn't work?
If the illumination light on your Beko Ventilation Hood isn't working, there are several things to check: * Make sure the mains voltage is between 220 and 240 V by checking the electrical connection. * Ensure the lamp switch is in the "on" position. * Inspect the lamps themselves to see if they need replacing.
How to improve air inlet of Beko Ventilation Hood?
To ensure adequate air inlet for your Beko Ventilation Hood: * Inspect the aluminium grease filter and clean it at least once a month under normal operating conditions. * Check the air discharge chimney to make sure it is in the “on” position. * If your appliance has carbon filters, inspect them and replace them once every 3 months under normal conditions.
General safety instructions to protect from fire, electric shock, injury, and property damage.
Instructions on mounting the hood to the wall using hanger plates.
Guide on connecting the internal and external flue parts for proper ventilation.
Explanation of the control panel keys (A, B, C) for fan speed and light operation.
Instructions for cleaning aluminum filters, including removal and washing.
Information on carbon filters for non-flue use and their replacement necessity.
Step-by-step guide to remove old carbon filters and install new ones.
General| Current | 10 A |
|---|---|
| Motor power | - W |
| Auto power off | Yes |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 Hz |
| Annual energy consumption | 76 kWh |
| Type | Wall-mounted |
| Control type | Touch |
| Product color | Black, Stainless steel |
| Built-in display | - |
| Noise level | 71 dB |
| Number of speeds | 3 |
| Type of extraction | Ducted/Recirculating |
| Maximum extraction power | 632 m³/h |
| Fluid dynamic efficiency class | C |
| Bulb type | LED |
| Number of bulbs | 2 bulb(s) |
Weight and Dimensions| Depth | 337 mm |
|---|---|
| Width | 600 mm |
| Height | 1360 mm |
| Height (min) | 930 mm |
To Next Page
