Beko SIM4126B - Spraying Water; Dry Ironing; Automatic Shutdown (Auto-Off)

13 / EN
Steam Iron / User Manual
3.9 Sprayng water
1. Fll the water reservor (see. 3.3).
2. Set the temperature (see. 3.5).
3. Press the water sprayng button
(10) to spray water.
C
You can easly
remove creases
usng the water
sprayng feature.
3.10 Dry ronng
In order to make dry ronng, set
the steam settng button (8) to the
OFF “ ” poston.
C
Havng water n the
applance would be
advantageous; you
may use the water
sprayng button (10)
when necessary.
3.11 Automatc
Shutdown (Auto-Off)
• If the appliance is hold stationary
for 30 seconds while in horizon-
tal position, it will be automati-
cally turned off.
• If the appliance is hold stationary
for 7-10 minutes while in upright
position, it will be automatically
turned off.
• If the appliance is hold stationary
for 30 seconds while in a leaned
(right or left) position, it will be
automatically turned off.
C
In case of automatc
turn off the auto-off
lght (11) flashes.
• If the appliance is moved in hori-
zontal position it will be turned
on.
C
It may take 60
seconds for the
soleplate (5) to reach
the prevously set
temperature.
3
Operaton