How to fix a Beko TR310 that won't turn on?
If your Beko Dryer does not turn on or the program cannot be started, check the following: * Ensure that the power cord is plugged in. * Make sure the loading door is properly closed. * Verify that a program is set and the dryer is not in Pause mode. * Check if the child lock is activated and turn it off if it is.
Why is my Beko TR310 Dryer leaking water from the door?
If water drips from the loading door of your Beko Dryer, it might be because fibres have gathered on the inner sides of the loading door and the loading door gasket. Clean the inner surfaces of the loading door and the loading door gasket surfaces.
What does the fibre filter cleaning icon mean on my Beko Dryer?
If the fibre filter cleaning icon is lit on your Beko Dryer, it means that the fibre filter may be unclean. Wash the filters with warm water and dry them. Also, make sure that the interior and exterior filters are inserted to their places.
What does it mean when the condenser warning icon is flashing on my Beko Dryer?
If the condenser warning icon is flashing on your Beko Dryer, it could be because the condenser front side is clogged with fibres, so clean the front side of the condenser. Also, ensure that the interior and exterior filters are inserted to their places.
Why is my Beko TR310 Dryer taking so long to dry?
If the drying operation of your Beko Dryer is taking too long, it might be due to several reasons: * The fibre filters may be clogged, so wash them with warm water and dry. * The condenser front side may be clogged, so clean it. * The ventilation grills may be blocked, so remove any obstruction. * The room may be too small, so open the door or windows. * A lime layer may have accumulated on the humidity sensor, so clean it. * The dryer might be overloaded, so reduce the amount of laundry. * The laundry might not have been wrung adequately, so perform a higher speed wringing on the washing machine.
What to do if clothes are damp after drying in my Beko TR310 Dryer?
If your clothes are damp after drying in your Beko Dryer, it could be due to: * Using an unsuitable program. Check the maintenance labels on the clothes and select an appropriate program, or use time programs as extra. * Clogged fibre filters. Wash the filters with warm water and dry them. * A clogged condenser. Clean the front side of the condenser. * Overloading the dryer. Avoid loading excessive amounts of laundry. * Inadequate wringing. Perform a higher speed wringing on the washing machine.
Why is the water tank warning symbol flashing on my Beko TR310?
If the water tank warning symbol is on or flashing on your Beko Dryer, it indicates that the water tank may be full, so empty it. Also, if the product is connected directly to the water drain, check the water discharge hose for any collapse.
Why did my Beko TR310 program stop for no reason?
If the program on your Beko Dryer terminated prematurely, it might be due to: * The loading door not being completely closed, so ensure that it is properly closed. * A power outage, so press the Start / Pause / Cancel button to restart the program. * The water tank being full, so empty the water tank.
Why have my clothes shrunk in my Beko TR310?
If clothes have shrunk, hardened, or spoiled after drying in your Beko Dryer, it indicates that a program not suitable for the laundry type might have been used. Check the maintenance labels on the clothes and select a program suitable for the clothes.
Why does the loading door open by itself on my Beko Dryer?
If the loading door of your Beko Dryer opens by itself, push the loading door until the closing sound is heard.
To Next Page
General
