How to fix a Beko Dryer that won't turn on?
If your Beko Dryer isn't turning on or the program won't start, first ensure the power cord is plugged in and the loading door is fully closed. Also, verify that a program is selected and the dryer isn't paused. Finally, check if the child lock is activated and, if so, turn it off.
Why is my Beko TR320 leaking water from the door?
If water is dripping from the loading door of your Beko Dryer, fibres may have accumulated on the inner sides of the loading door and the loading door gasket. Clean these surfaces.
How to turn off the fibre filter light on my Beko TR320 Dryer?
If the fibre filter cleaning icon is lit on your Beko Dryer, the fibre filter (interior and exterior) may be unclean or not properly inserted. Wash the filters with warm water and dry them. Also, ensure that the interior and exterior filters are correctly placed.
What does it mean when the condenser warning light is flashing on my Beko TR320 Dryer?
If the condenser warning icon is flashing on your Beko Dryer, the condenser front might be clogged with fibres. Clean the front side of the condenser. Also, make sure the interior and exterior filters are properly inserted.
Why does my Beko TR320 Dryer take so long to dry clothes?
Several factors can cause prolonged drying times with your Beko Dryer. The fibre filters might be clogged; try washing them with warm water and drying them. The condenser front might be blocked, so cleaning it is recommended. Ensure the ventilation grills aren't obstructed and that the room is adequately ventilated. A lime layer on the humidity sensor or overloading the machine can also extend drying time. Insufficient wringing before drying can also cause this issue; try a higher speed wringing in your washing machine.
What to do if clothes come out damp from my Beko TR320?
If your clothes are damp after drying in your Beko Dryer, it could be due to several reasons. You may have used a program not suitable for the laundry type, so check the care labels and select the appropriate program. Clogged fibre filters or a blocked condenser front can also cause this. Overloading the dryer or not wringing the clothes adequately beforehand can also leave them damp. Try washing the filters with warm water and drying them, cleaning the condenser, reducing the load size, or using a higher spin speed on your washing machine.
Why is the water tank warning light on my Beko Dryer flashing?
If the water tank warning symbol is on or flashing on your Beko Dryer, it means the water tank is likely full; empty it. If your dryer is connected directly to a water drain, inspect the water discharge hose for any collapse.
Why does my Beko TR320 program stop in the middle of the cycle?
If your Beko Dryer program stops unexpectedly, ensure the loading door is completely closed. A power outage could also be the cause; press the Start / Pause / Cancel button to restart the program. Also, the water tank might be full, so empty it.
Why did my clothes shrink in the Beko TR320?
Clothes shrinking, hardening, or spoiling in your Beko Dryer usually means the selected program wasn't suitable for the laundry type. Check the care labels on your clothes and choose an appropriate program.
Why does the Beko TR320 door keep opening?
If the loading door of your Beko Dryer opens by itself, it might not be completely closed. Push the loading door until you hear the closing sound.
To Next Page
General
