Beko TR325 - User Manual

Questions and Answers

H
hullderekAug 18, 2025
What to do if clothes come out damp after drying in my Beko TR325 Dryer?
- G
  Gary WilliamsAug 18, 2025
  If your clothes are still damp after drying, it could be due to several reasons. First, ensure that you're using a program suitable for the type of laundry you're drying. Check the care labels on your clothes to select the appropriate program. Also, clogged fibre filters or a blocked condenser front can cause this issue, so wash the filters and clean the condenser. Avoid overloading the dryer and make sure your laundry is properly wrung before placing it in the dryer.
S
Sarah HowellAug 21, 2025
What to do if my Beko TR325 Dryer doesn't turn on or the program won't start?
- J
  John HollandAug 21, 2025
  If your Beko Dryer isn't turning on, first ensure that the power cord is properly plugged in. Check that the loading door is fully closed. Make sure a program is selected and that the dryer is not in pause mode. Finally, verify that the child lock is deactivated.
I
Isaac MartinAug 23, 2025
Why does my Beko Dryer program stop prematurely?
- J
  Joseph BenitezAug 23, 2025
  A program may terminate prematurely if the loading door isn't completely closed, so ensure that the loading door is properly closed. A power outage can also cause this, so press the Start / Pause / Cancel button to restart the program. Also, if the water tank is full, empty it.
C
Courtney GrantAug 26, 2025
Why is the fibre filter cleaning icon lit on my Beko TR325?
- S
  Samuel JohnsonAug 26, 2025
  The fibre filter cleaning icon lights up when the fibre filter may be unclean or there may be a layer formed on the fibre filter pores that leads to clogging. Wash the filters with warm water and dry them. Also, make sure that the interior and exterior filters are inserted to their places.
A
Alyssa BakerAug 28, 2025
Why does drying take so long with my Beko TR325?
- T
  Timothy JohnsonAug 28, 2025
  Several factors can cause prolonged drying times. The fibre filters may be clogged, so wash them with warm water and dry them. The condenser front may be blocked, so clean it. Ensure that the ventilation grills are free from obstructions. Inadequate ventilation in the installation area can also be a factor, so open a door or window. A lime layer on the humidity sensor needs cleaning. Avoid overloading the machine and ensure laundry is adequately wrung before drying.
S
sue61Aug 30, 2025
Why is the water tank warning symbol on my Beko TR325 flashing?
- A
  Angela BushAug 31, 2025
  The water tank warning symbol indicates that the water tank is full, so empty it. Alternatively, if your dryer is connected directly to a water drain, the water discharge hose might be collapsed, so check the hose.
B
Barbara ReedSep 2, 2025
Why is the condenser warning icon flashing on my Beko Dryer?
- L
  lopezfranklinSep 2, 2025
  The condenser warning icon flashes when the condenser front side may be clogged with fibres, so clean the front side of the condenser. Also, make sure that the interior and exterior filters are inserted to their places.
A
Amber MillsSep 4, 2025
Why have clothes shrunk in my Beko Dryer?
- E
  emcphersonSep 4, 2025
  Clothes may shrink, harden, or spoil if a program not suitable for the laundry type was used, so check the maintenance labels on the clothes and select a program suitable for the clothes.
B
Brett YoungSep 7, 2025
Why does water drip from the loading door of my Beko Dryer?
- G
  Gregory WardSep 7, 2025
  Water may drip from the loading door if fibres have gathered on the inner sides of the loading door and the loading door gasket, so clean these surfaces.
B
Brianna EwingSep 9, 2025
How to fix a Beko TR325 loading door that opens by itself?
- M
  Martin MoonSep 9, 2025
  If the loading door opens by itself, push the loading door until the closing sound is heard.