This document is a user manual for Voltas Beko washing machines, covering various models including WTL60UPWC, WTL60UPGC, WTL62UPWC, WTL62UPGB, WTL65UPGC, WTL65UPGB, WTL70UPGC, WTL70UPGB, WTL80UPGB, and WTL90UPGB. It provides essential information for safe operation, installation, usage, maintenance, and troubleshooting.
Function Description
The Voltas Beko washing machine is designed for domestic use, specifically for washing and rinsing laundry. It offers a range of programs and functions to cater to different fabric types and soil levels, aiming for efficient and effective cleaning. The machine is designed to be user-friendly with a control panel that allows for program selection, water level adjustment, and delayed start.
Important Technical Specifications
The manual provides a table of technical specifications for various models. Key specifications include:
- Height: Ranges from 905 cm to 965 cm.
- Width: Ranges from 525 cm to 540 cm.
- Depth: Ranges from 550 cm to 565 cm.
- Net weight: Ranges from 30 kg to 32 kg.
- Electrical input: 230V~/50Hz for all listed models.
- Total power: Ranges from 505 W to 530 W.
- Spin speed (rpm/min., max.): 700 rpm for all listed models.
- Water supply pressure: 1-10 bar (0.1-1 MPa).
- Water flow rate: 10-80 liters per minute from a fully open tap for smooth operation.
The product is manufactured from recyclable materials and complies with EU WEEE Directive (2012/19/EU) and RoHS Directive (2011/65/EU), indicating its commitment to environmental responsibility and absence of harmful substances. The service life of the product is stated as 10 years, with original spare parts available during this period.
Usage Features
The washing machine offers a variety of programs and functions accessible via its control panel, which may vary slightly between six-button and four-button models.
Control Panel Elements:
- On/Off button: To power the machine on or off.
- Start/Pause button: To start, pause, or resume an operation.
- Program button: To select different washing programs.
- Delayed Start Time button (Optional): To set a delay for the program start, up to 18 hours.
- Water Level button: Allows manual adjustment of the water level, although it is automatically adjusted by default. Water levels can be set from Low to 10.
- Process button: For six-button models, this button allows selection of additional processes like Soak, Wash, Rinse, and Spin.
Main Programmes (Six-Button Models):
- Mix: Automatically selects the best water level and wash course for cotton and blended items.
- Wool: For washing woolen clothes, checking care labels is recommended.
- Eco: For lightly/daily soiled laundry in a short time.
- Tub Clean: For sanitizing and cleaning the machine monthly, to be operated empty.
- Saree: For machine-washable delicate items like sweaters, jumpers, and cardigans. Special purpose detergents are recommended.
- Monsoon: Provides extra spin time for drying clothes during monsoon season.
- Quick: For light loads of lightly soiled cotton clothes in a short time.
- Heavy: For full capacity loads of heavily soiled durable cotton and blended clothes.
- Baby Wear: For full capacity loads of heavily soiled durable cotton and blended clothes.
- Multi Colour: For full capacity loads of multi-colored clothes.
Main Programmes (Four-Button Models):
- Mix: Similar to the six-button model, for cotton and blended items.
- Wool: For washing woolen clothes.
- Eco: For lightly/daily soiled laundry.
- Tub Clean: For monthly machine sanitization, to be operated empty.
- Saree: For machine-washable delicate items.
- Monsoon: Only applies spin drying and provides extra spin time.
- Quick: For light loads of lightly soiled cotton clothes.
- Heavy: For full capacity loads of heavily soiled durable cotton and blended clothes.
Process Selection:
- Wash: The default washing process.
- Soaking: Recommended for heavily soiled laundry, allowing detergent to be added.
- Rinse: Applies only rinsing during an executed program.
- Spin: Applies only spinning during an executed program.
Child Lock:
- Six-button models: Activated by pressing "Water level" and "Delay" buttons simultaneously for 3 seconds. "Child Lock" appears on the display.
- Four-button models: Activated by pressing "Water level" and "Program" buttons simultaneously for 3 seconds. "Child Lock" appears on the display.
- To release, press the same two buttons again.
Laundry Preparation:
- Sorting: Sort laundry by fabric type, color, and soil level. Always follow garment tags.
- Pre-washing: Remove metal attachments, empty pockets, and turn clothes inside out. Use laundry bags for small or delicate items. Fasten zippers and mend tears.
- Detergent and Softener Usage: Use detergents, softeners, and supplements suitable for automatic washing machines. Follow instructions on packaging. The manual details advanced and simple detergent drawers, including compartments for main wash, softener, and bleach. It also provides guidance for using liquid, gel, tablet, and starch detergents.
- Load Capacity: The manual provides a table for correct load capacity for various items (e.g., bathrobe, napkin, duvet cover, bed sheet, pillowcase, towel, hand towel, evening gown, underclothing, men's overalls, men's shirt, men's pajamas, blouses). Overloading can cause noise and vibration.
Energy Saving Tips:
- Operate at the highest capacity allowed by the selected program without overloading.
- Follow detergent packaging instructions.
- Wash lightly soiled laundry at warm or cold water.
- Use faster programs for small, lightly soiled loads.
- Avoid soaking and hot water for lightly soiled laundry.
- Select longer spin times if using a dryer.
- Do not use excessive detergent.
Maintenance Features
Regular maintenance is crucial for extending the product's life and preventing problems.
Cleaning the Detergent Drawer:
- Clean every 4-5 washing cycles to prevent powder detergent accumulation.
- Pull the drawer forward, then move it upwards to remove.
- Clean with water.
Cleaning the Body and Control Panel:
- Wipe the machine body with soapy water or mild gel detergents and dry with a soft cloth.
- Use a soft, damp cloth for the control panel.
Cleaning the Water Intake Filters:
- Filters are located at the end of each water intake valve at the rear of the machine and at the end of each water intake hose where they connect to the tap.
- Close taps before cleaning.
- Remove hose nuts to access filters on water intake valves. Clean with a brush or pliers if very dirty.
- Remove filters and gaskets from the flat ends of the water intake hoses and clean under running water.
- Replace gaskets and filters carefully and tighten hose nuts by hand.
Cleaning the Fuzz Collector:
- Push to take the filter out.
- Open and clean the filter, ensuring the filter rubber is in its original position.
- Reassemble the filter in the correct position after cleaning.
Troubleshooting:
The manual includes a comprehensive troubleshooting guide for common issues such as:
- No power: Check voltage, plug connection.
- Water not draining: Check drain hose position (down, unfolded, not clogged).
- Washing machine not working: Check lid closure, Start/Pause button, water level, water pressure, tap closure.
- Frozen drain hose, water tap, or drum: Instructions for thawing using hot water.
- Water not draining immediately: Check for clogs (coins, pins) or incorrect drain hose position.
- Water leaks at water supply hose connector: Check for loose connections, folded hose, or excessive water pressure.
- Water not supplied: Check Start/Pause button, tap closure, clogged filter net, or water supply cut-off.
- Loud noises and vibrations during spinning: Check for uneven laundry distribution, machine levelness, and obstructions around the machine.
Error Messages:
The manual lists specific error messages and their corresponding controls:
- E0: Top lid opened when preset is started – Close lid.
- E1: After draining 5 minutes, it still does not reach water level – Open lid, troubleshoot, close lid.
- E2: Top lid open when spinning – Close lid.
- E3: Spin not balanced – Open lid, redistribute laundry, close lid.
- E4: After inlet 20 minutes still not reach to setting water level – Open lid, troubleshoot, close lid.
- E5: Top lid opened after setting child-lock – Close lid.
- F1: Water level sensor is wrong – Cut power, call technicians.
For persistent problems, users are advised to consult their dealer or Authorized Service Agent and never attempt repairs themselves.
Warranty:
The Voltas Beko washing machine comes with a 3-year comprehensive warranty from the date of purchase, with an additional 9-year warranty on the motor (total 12 years on motor). The warranty covers functional spare parts due to faulty material, defective components, or manufacturing defects. It does not cover damages from unauthorized repairs, tampering, misuse, or external factors like power surges or corrosive environments. Installation and demo services are typically free once within a month of purchase. Customer care contact details are provided for support.
Need help?
To Next Page
General