Beko VRR 71214 VW - User Manual

Questions and Answers

K
kristin59Aug 14, 2025
Why my Beko VRR 71214 VW Vacuum Cleaner cannot connect to the Wi-Fi network?
- T
  Tanner ReedAug 14, 2025
  If your Beko Vacuum Cleaner cannot connect to Wi-Fi, it might be due to a weak signal. Ensure the Wi-Fi signal is strong where the vacuum cleaner is located. It could also be due to a cutoff in the Wi-Fi connection, in which case you should reset the Wi-Fi, download the latest mobile application and try again. Ensure that the password is correct. Also, this robot vacuum supports the 2.4G frequency band only.
A
alicia51Aug 17, 2025
What to do if Beko VRR 71214 VW cleaning performance is low and dust leaks?
- W
  William MosleyAug 17, 2025
  If your Beko Vacuum Cleaner's cleaning performance is low or dust leaks, the dust container may be full, so you should clean it. Alternatively, the filter might be clogged, requiring cleaning or replacement. Foreign materials in the main brush can also cause this issue, so you should clean the main brush.
J
juliasnyderAug 21, 2025
Why is my Beko VRR 71214 VW Vacuum Cleaner battery not charging?
- J
  Jeffrey FowlerAug 21, 2025
  If the battery of your Beko Vacuum Cleaner is not charging, remove the robot vacuum cleaner and check if the indicator light on the charging dock station is illuminated and ensure that both ends of the power adaptor of the charging dock are connected. Also, loose contacts may be the cause, so clean the spring contacts on the charging dock and the charging contacts on the robot vacuum cleaner. Ensure that the on/off button on the side of the robot vacuum cleaner is brought to position “I”.
P
Paul WilliamsonAug 26, 2025
How to fix a Beko Vacuum Cleaner that cannot be operated?
- J
  joneshenryAug 26, 2025
  If your Beko Vacuum Cleaner cannot be operated, the charging level may be low. Place the robot vacuum cleaner on the charging dock, aligning it with the charging poles, and ensure the button on the left is in the “I” position. The ambient temperature may also be a factor; use the vacuum cleaner at a temperature between 0 and 40 °C. Also, ensure that the on/off button on the side of the robot vacuum cleaner is brought to position “I”.
A
Ashley EscobarAug 28, 2025
What to do if my Beko VRR 71214 VW Vacuum Cleaner does not return to the charging station?
- S
  Sara JacobsonAug 28, 2025
  If your Beko Vacuum Cleaner does not return to the dock/station for charging, there may be too many obstacles around the charging dock. Place the charging dock in an area free of obstacles. The robot vacuum cleaner might also be too far from the charging dock; bring it closer and try again. Make sure that the charging stand station is plugged and there is energy.
M
Michael DunnSep 1, 2025
Why does my Beko Vacuum Cleaner operate with abnormal noise?
- R
  Robert Simmons Jr.Sep 2, 2025
  If your Beko Vacuum Cleaner operates with abnormal noise, foreign materials may have entered the main brush, side brushes, or wheels. Turn off the robot vacuum cleaner and clean it.
G
gsteeleSep 5, 2025
Why the timed cleaning feature does not operate on my Beko Vacuum Cleaner?
- S
  sarahhernandezSep 5, 2025
  If the timed cleaning feature on your Beko Vacuum Cleaner does not operate, the charging level may be low. Timed cleaning can only be started when the charge level is higher than 20%.
K
Katherine LeeSep 9, 2025
Why does Beko VRR 71214 VW Vacuum Cleaner consumes power while it is in the charging dock?
- C
  Cathy GardnerSep 9, 2025
  The Beko Vacuum Cleaner consumes very little power while in the charging dock; this feature allows it to keep the battery performance at its best level.