What to do if my Beko WCV 6611 BW Washer does not drain water?
If your Beko Washer isn't draining water, the water drain hose might be clogged or twisted, so clean or flatten the hose. Alternatively, the pump filter could be clogged, requiring you to clean the pump filter.
Why does my Beko WCV 6611 BW Washer enter standby mode or not take in water?
If your Beko Washer enters standby mode or doesn't take in water, check if the tap is turned on and turn it on if it's off. Also, ensure the water inlet hose is not bent and flatten it if it is. Clean the water inlet filter if it is clogged. Make sure the loading door is closed properly. Finally, check the water connection; if the water is cut off, press the Start/Pause key after the water has been supplied again to resume the operation from standby mode.
How to start Beko WCV 6611 BW after closing the door?
If the Beko Washer doesn't start after closing the door, make sure you press the Start / Pause / Cancel button. Also, if you have loaded too much laundry, it may be difficult to close the loading door properly, so reduce the amount of laundry and ensure the door is closed correctly.
Why laundry in my Beko Washer doesn't smell like the softener?
If the laundry in your Beko Washer doesn't smell like the softener, it might be because the detergent is put in the wrong compartment. If detergent is put in the prewash compartment although prewash cycle is not selected, machine can take this detergent during rinsing or softener step. Wash and clean the dispenser with hot water and put the detergent in the correct compartment. Also, make sure you do not mix the softener with detergent, and wash and clean the dispenser with hot water.
Why does my Beko WCV 6611 BW Washer vibrate or make noise?
If your Beko Washer vibrates or makes noise, it might be due to several reasons. First, check if the machine is standing unbalanced and adjust the feet to level it. Ensure the transportation safety bolts are removed. A hard substance might have entered the pump filter, so clean the pump filter. The laundry quantity could be too little, so add more laundry, or the machine might be overloaded, so take some laundry out. Also, make sure that the machine is not leaning on anything.
Why is there detergent residue in the Beko WCV 6611 BW Washer detergent drawer?
If you see detergent residue in the detergent drawer of your Beko Washer, dry the detergent drawer before putting in detergent. Ensure detergents are kept closed in an environment free of humidity and not exposed to excessive temperatures. Check the water pressure and clean the holes of the detergent compartment if they are blocked. Do not mix the softener with detergent. Wash and clean the dispenser with hot water. Clean the drum regularly. For this, please see 4.4.2. Contact the Authorized Service Agent if there is a problem with the detergent drawer valves.
Why does too much foam form in my Beko WCV 6611 BW Washer?
If too much foam forms in your Beko Washer, use detergents appropriate for the washing machine and only a sufficient amount. Store detergent in a closed and dry location, not in excessively hot places. If washing meshed laundry such as tulle, use smaller amounts of detergent. Put the detergent in the correct compartment. If softener is being taken early, contact the Authorized Service Agent as there may be a problem in the valves or in the detergent dispenser.
Why does my Beko Washer directly discharge the water it takes in?
If your Beko Washer directly discharges the water it takes in, the draining hose might not be at an adequate height. Connect the water draining hose as described in the operation manual.
Safety instructions to prevent injuries and material damage risks.
Guidelines for safe use by children and keeping children away from packaging.
Instructions to prevent electric shock and ensure safe electrical connections.
Warning about the hot loading door glass during high temperature washes.
Product compliance with WEEE Directive for waste electrical equipment recycling.
Information on recyclable packaging materials and their disposal.
Guidelines for selecting a suitable and safe location for the washing machine.
Instructions for removing packaging reinforcement before installation.
Steps to remove transportation safety bolts before operating the machine.
Instructions for connecting the water supply hose and checking for leaks.
Guidance on connecting the drain hose to a suitable drain point and height.
How to adjust the machine's feet for stability and vibration reduction.
Requirements for connecting the machine to a grounded electrical outlet.
Preparation steps before the first wash, including drum cleaning.
How to sort and prepare clothes before washing, including removing metal parts.
Tips for energy efficiency and guidance on correct load capacity.
Step-by-step guide on how to load laundry into the machine.
Guidance on selecting and using detergents, softeners, and other agents.
Instructions for using specific cleaning agents like liquid, gel, starch, and bleach.
Advice on achieving efficient washing based on soiling and fabric types.
Explains the washing machine's control panel and its components.
Steps to prepare the machine before starting a wash cycle.
How to choose the appropriate wash program and temperature.
A table detailing program durations, load capacities, and consumption values.
Explains main wash programs like Cottons, Synthetics, and additional programs.
Details on specific programs for bedding, drum cleaning, rinse, and spin.
How to adjust spin speed and use the delayed start function.
Steps to start a program and activate/deactivate the child lock.
How to track program progress and understand the door lock behavior.
How to modify settings, pause, and add/remove laundry during a cycle.
How to cancel, end, or pause programs, and energy saving features.
Instructions for cleaning the detergent dispenser and siphon.
How to clean the drum, door seal, and prevent rust stains.
Guide for cleaning the machine's body and control panel.
Steps to clean the filters in water intake valves and hoses.
Procedure for draining residual water and cleaning the pump filter.
Solutions for problems with starting, selecting, and operating wash programs.
Troubleshooting water intake, drainage, leaks, noise, and vibration.
Solutions for door opening, unexpected stops, and direct water discharge.
Addressing extended program durations and timer countdown problems.
Solutions for laundry turning gray or having persistent stains.
Resolving issues related to laundry smell and stiffness after washing.
Troubleshooting detergent residue in the dispenser drawer.
Solutions for excessive foam formation and laundry remaining wet.
General| Capacity | 6 kg |
|---|---|
| Maximum Spin Speed | 1000 RPM |
| Energy Efficiency Class | A+++ |
| Dimensions (H x W x D) | 84 x 60 x 54 cm |
| Noise Level (Spinning) | 76 dB |
| Number of Programs | 15 |
| Type | Front Load |
To Next Page
