What to do if my Beko WITV 8712 XW0 does not drain water?
If your Beko Washer isn't draining water, the water drain hose might be clogged or twisted (clean or flatten the hose), or the pump filter might be clogged (clean the pump filter).
Why won't my Beko WITV 8712 XW0 loading door open?
The loading door of your Beko Washer might not open because the door lock is activated due to the water level (drain the water by running the Pump or Spin programme), the machine is heating or spinning (wait until the programme completes), the child lock is engaged (wait a couple of minutes after the programme ends), the door may be stuck (push and pull the door to release it), water pressure is low (the machine waits until it takes in adequate amount of water), voltage might be low (washing time is prolonged), input temperature of water might be low (required time to heat up the water extends), or the number of rinses might have increased (machine increases the amount of rinse water when good rinsing is needed).
What to do if my Beko Washer is not rinsing well?
If your Beko Washer isn't rinsing well, it could be due to inappropriate detergent (use a detergent appropriate for the washing machine and your laundry and keep detergents closed in an environment free of humidity), detergent in the wrong compartment (put the detergent in the correct compartment), a clogged pump filter (check the filter), or a folded drain hose (check the drain hose).
What to do if my Beko WITV 8712 XW0 Washer program does not start?
If the Beko Washer program doesn't start after closing the door, it might be because the Start / Pause / Cancel button wasn't pressed (press it), or the loading door might be difficult to close due to excessive loading (reduce the laundry amount and ensure the door is properly closed).
Why is my Beko Washer leaking water from the bottom?
If water is leaking from the bottom of your Beko Washer, the water drain hose might be clogged or twisted (clean or flatten it), or the pump filter might be clogged (clean the pump filter).
Why is my Beko Washer vibrating and making noise?
Your Beko Washer might be vibrating or making noise due to several reasons: it may be standing unbalanced (adjust the feet to level it), a hard substance might have entered the pump filter (clean the pump filter), transportation safety bolts are not removed (remove them), laundry quantity might be too little (add more laundry), the machine might be overloaded (take out some laundry or distribute the load), or the machine might be leaning on something (ensure it's not leaning on anything).
Why does my Beko WITV 8712 XW0 keep going into standby mode?
The Beko Washer might enter standby mode or not take in water because the tap is off (turn it on), the water inlet hose is bent (flatten it), the water inlet filter is clogged (clean it), the loading door is open (close it), or the water connection is wrong/water is cut off (check the connection and press Start/Pause after water is supplied).
Why is my Beko WITV 8712 XW0 laundry turning gray?
Laundry turning gray in your Beko Washer can be due to insufficient detergent over time (use the recommended amount), washing at low temperatures for too long (select the proper temperature), insufficient detergent with hard water (use the recommended amount), or too much detergent (use the recommended amount).
Why is my Beko WITV 8712 XW0 Washer laundry stiff after washing?
Laundry becoming stiff after washing in your Beko Washer can be due to insufficient detergent (use an appropriate amount), detergent in the wrong compartment (put it in the correct compartment), or detergent mixed with softener (do not mix them and clean the dispenser).
Why is my Beko WITV 8712 XW0 Washer laundry not smelling like softener?
If your laundry doesn't smell like softener after washing in your Beko Washer, it could be because the detergent is in the wrong compartment (put it in the correct compartment, wash and clean the dispenser with hot water), or the detergent might be mixed with the softener (do not mix them and clean the dispenser).
Safety instructions to prevent injuries and material damage.
Safety instructions related to electrical connections and usage to prevent shock.
Detailed instructions for connecting the water inlet hose and water pressure requirements.
Guidance on correctly connecting the drain hose for proper water discharge.
Instructions for safe and proper electrical connection to the power outlet.
An overview of the washing machine's control panel and button functions.
A table detailing programmes, load capacities, water/energy consumption, and settings.
How to adjust and select the washing temperature for programmes.
Instructions on how to select and adjust the spin speed.
How to select and manage auxiliary washing functions.
How to use the delayed start function to postpone the start of a programme.
Steps to cancel a running wash programme.
Procedures for draining water and cleaning the pump filter.
Solutions for problems related to starting, selecting, or operating programmes.
Troubleshooting for water intake, leakage, and drainage issues.
Solutions for poor washing results, stains, fading, and odors.
Solutions for problems arising from detergent/softener use and excessive foam.
To Next Page
General
