Beko WMY 8046 LB2 - User Manual

Questions and Answers

T
tracy89Sep 10, 2025
Why programme time does not countdown on my Beko WMY 8046 LB2?
- A
  Aaron HowardSep 10, 2025
  If your Beko Washer programme time does not countdown, the timer may stop during water intake until the machine takes in adequate amount of water. The timer may also stop during the heating step until the machine reaches the selected temperature. Additionally, the timer may stop during the spinning step if the automatic unbalanced load detection system is activated due to the unbalanced distribution of the laundry in the drum.
M
Mark ChenAug 22, 2025
Why is my Beko WMY 8046 LB2 not filling with water?
- K
  Kristina MayoAug 23, 2025
  If your Beko Washer isn't filling with water, start by checking if the tap is turned off and turn it on. Also, the water inlet hose might be bent, so flatten the hose. The water inlet filter could be clogged, requiring you to clean the filter. Lastly, ensure the loading door is fully closed.
K
Kimberly Wallace DVMAug 25, 2025
What to do if there is water leaking from the bottom of my Beko Washer?
- M
  Morgan WrightAug 25, 2025
  If there's water leaking from the bottom of your Beko Washer, the water drain hose might be clogged or twisted; in this case, clean or flatten the hose. Also, the pump filter could be clogged, so clean the pump filter.
T
Terry MoyerAug 26, 2025
How to open the loading door of my Beko WMY 8046 LB2 Washer?
- R
  Rachel AndrewsAug 27, 2025
  If the loading door of your Beko Washer cannot be opened, it might be due to the door lock being activated because of the water level in the machine, so drain the water by running the Pump or Spin programme. The machine could also be heating water or in the spinning cycle, so wait until the programme completes. Alternatively, the child lock might be engaged, so wait a couple of minutes for deactivation of the door lock.
W
Walter RodriguezAug 27, 2025
Why my Beko WMY 8046 LB2 directly discharges the water it takes in?
- P
  Phillip MckayAug 28, 2025
  If your Beko Washer directly discharges the water it takes in, the draining hose might not be at an adequate height. Connect the water draining hose as described in the operation manual.
J
Jeffrey EllisAug 29, 2025
What to do if the program does not start after closing the door on my Beko Washer?
- A
  Anthony NavarroAug 29, 2025
  If your Beko Washer programme does not start after closing the door, press the Start / Pause / Cancel button.
I
iwilkinsSep 18, 2025
Why too much foam forms in my Beko Washer?
- H
  Holly GeorgeSep 18, 2025
  If too much foam forms in your Beko Washer, use detergents appropriate for the washing machine and only a sufficient amount of detergent. Store detergent in a closed and dry location, not in excessively hot places. Use smaller amounts of detergent for meshed laundry. Put the detergent in the correct compartment.
S
sanchezconnieSep 12, 2025
Why is washing taking longer time than specified in the manual on my Beko Washer?
- C
  Chris Valdez MDSep 12, 2025
  If your Beko Washer is taking longer than specified in the manual, it could be due to low water pressure, causing the machine to wait until it takes in an adequate amount of water. Low voltage or a low input water temperature can also extend washing time. Additionally, the number of rinses or the amount of rinse water might have increased, or excessive foam might have occurred, activating the automatic foam absorption system due to too much detergent usage. In this case, use the recommended amount of detergent.
J
Jordan HernandezSep 8, 2025
Why is the washing performance poor and stains persist or the laundry is not whitened with my Beko WMY 8046 LB2?
- R
  rebecca91Sep 8, 2025
  If the washing performance of your Beko Washer is poor and stains persist or the laundry is not whitened, ensure you are using the recommended amount of detergent appropriate for water hardness and the laundry. Avoid loading the machine excessively, and select the proper programme and temperature for the laundry. Also, use original detergent appropriate for the machine and put the detergent in the correct compartment. Do not mix the bleaching agent and the detergent with each other.
J
Javier HallSep 5, 2025
Why is the washing performance poor and laundry turns gray with my Beko WMY 8046 LB2 Washer?
- T
  Timothy AlexanderSep 5, 2025
  If the washing performance of your Beko Washer is poor and your laundry turns gray, it could be due to several reasons. You might have used an insufficient amount of detergent over a long period, so use the recommended amount of detergent appropriate for water hardness and the laundry. Washing at low temperatures for a long time can also cause this, so select the proper temperature for the laundry to be washed. Also, using insufficient detergent with hard water causes the soil to stick on the cloth and this turns the cloth into gray in time. It is difficult to eliminate graying once it happens. Finally, using too much detergent can also cause this issue, so use the recommended amount of detergent appropriate for water hardness and the laundry.

Summary

General Safety Instructions

Life and Property Safety

Safety instructions to prevent injuries and material damage risks related to product usage.

Childrens Safety

Guidelines for safe use by children and precautions to prevent accidents and injuries.

Electrical Safety

Instructions for safe electrical connections and usage to prevent electric shock hazards.

Hot Surface Safety

Warning about hot surfaces during operation and precautions for keeping children away.

Environmental and Usage Guidelines

Environmental Compliance

Information on product compliance with WEEE and RoHS directives for waste and hazardous materials.

Package Information

Details on the recyclability of packaging materials and disposal instructions.

Intended Use

Defines the product's purpose for domestic use only and proper laundry washing.

Technical Specifications

Installation Procedures

Step-by-step guide for product installation, including location, connections, and safety checks.

Water and Drain Connections

Details on connecting water supply hoses and the drain hose for proper machine operation.

Adjusting Feet and Electrical Connection

Guide to leveling the machine by adjusting feet and safe electrical connection procedures.

Initial Use Preparation

Preparation steps before first use, including running a drum cleaning program.

Wash Preparation Steps

Guidance on sorting laundry, preparing it, loading, and managing load capacity for washing.

Using Detergent and Softener

Instructions on using detergent, softener, choosing types, and adjusting amounts for effective washing.

Efficient Washing Tips

Recommendations for efficient washing based on soiling level, fabric type, and color.

Operating the Product

Control Panel Overview

Explanation of the control panel layout, buttons, and indicator lights for machine operation.

Programme Selection and Types

Guide to selecting wash programs and description of various programs for different laundry needs.

Temperature and Spin Speed Selection

How to adjust washing temperature and spin speed for optimal fabric care and water removal.

Programme and Consumption Table

Table detailing programs, temperatures, loads, consumption, and auxiliary functions for reference.

Auxiliary Function Selection

Explanation of how to select and use auxiliary functions like Prewash, Rinse Plus, and Anti-Creasing.

Programme Control and Timing

Managing program start, pause, door lock, and making changes after the program has started.

Child Lock, Program Cancellation, and Standby Mode

Features for child safety, program cancellation, end of program indication, and standby mode.

Maintenance and Cleaning

Cleaning the Detergent Drawer

Step-by-step guide for cleaning the detergent drawer and siphon to prevent residue buildup.

Cleaning the Loading Door and Drum

Procedure for cleaning the drum and door bellows, including recommendations for cleaning agents.

Cleaning Body, Filters, and Pump

Instructions for cleaning the machine body, water intake filters, and draining/cleaning the pump filter.

Troubleshooting

Program and Water Flow Issues

Solutions for program start, water filling, draining, and machine operation problems.

Washing Performance and Detergent Issues

Addressing poor washing results, stains, odors, foam, and detergent-related problems.

Laundry Condition and Maintenance Issues

Resolving issues like stiff laundry, faded colors, or problems arising from lack of drum cleaning.

Beko WMY 8046 LB2 Specifications

General

Brand	Beko
Model	WMY 8046 LB2
Category	Washer
Language	English

Related product manuals

Beko WMY 81283 PTLMB2

50 pages

Beko WMY 8736 XSX BTR