Beko WTV 8735 XC0ST - User Manual

Questions and Answers

M
Mason KellyAug 18, 2025
What to do if the loading door of my Beko WTV 8735 XC0ST Washer cannot be opened?
- M
  Michael FisherAug 18, 2025
  If your Beko Washer's loading door won't open, it could be due to several reasons. The door lock might be engaged because of the water level; try draining the water by running the Pump or Spin program. The machine might be heating water or in the spinning cycle, so wait until the program finishes. If the child lock is on, wait a few minutes after the program ends for it to deactivate. The door may also be stuck due to pressure; try pushing and pulling the door to release it.
P
Philip ParsonsAug 20, 2025
What to do if my Beko WTV 8735 XC0ST does not drain water?
- K
  Kenneth JohnsonAug 20, 2025
  If your Beko Washer is not draining water, the water drain hose may be clogged or twisted; in this case, clean or flatten the hose. Alternatively, the pump filter might be clogged, so try cleaning the pump filter.
J
Jennifer GrimesAug 23, 2025
Why is there water leaking from the bottom of my Beko WTV 8735 XC0ST Washer?
- R
  rebecca12Aug 23, 2025
  If your Beko Washer is leaking water from the bottom, it might be due to a clogged or twisted water drain hose. Try cleaning or flattening the hose. Another potential cause is a clogged pump filter, so clean the pump filter.
V
vadamsAug 26, 2025
Why is my Beko WTV 8735 XC0ST not filling with water?
- B
  Brian GomezAug 26, 2025
  If your Beko Washer isn't filling with water, start by checking if the tap is turned off and turn it on. Also, the water inlet hose might be bent, so flatten it. A clogged water inlet filter can also prevent water from entering, so clean the filter. Finally, ensure that the loading door is completely closed.
G
Gregory HintonAug 27, 2025
Why does my Beko WTV 8735 XC0ST Washer vibrate or make noise?
- T
  Tyler PriceAug 28, 2025
  If your Beko Washer vibrates excessively or makes unusual noises, several factors could be at play. First, ensure the machine is level by adjusting the feet. A hard object in the pump filter could also be the culprit, so clean the pump filter. Make sure you have removed the transportation safety bolts. The laundry load might be too small, in which case, add more items. Conversely, an overloaded machine can cause vibrations, so remove some laundry or redistribute it evenly. Finally, check that the machine isn't leaning against anything.
J
jenniferayalaAug 30, 2025
Why does the laundry turn gray after washing in my Beko WTV 8735 XC0ST Washer?
- E
  Evan WoodsAug 30, 2025
  If your Beko Washer laundry turns gray, it could be due to several reasons related to detergent usage and wash settings. You might not be using enough detergent for the water hardness and laundry load over a long period. Make sure to use the recommended amount. Washing at low temperatures for a long time can also cause this issue, so select the proper temperature for the laundry. Ensure you're using enough detergent for hard water, but also avoid using too much detergent.
T
Trevor McdowellSep 2, 2025
What to do if the programme cannot be started or selected on my Beko WTV 8735 XC0ST Washer?
- M
  Michael ScottSep 2, 2025
  If your Beko Washer programme cannot be started or selected, the washing machine may have switched to self-protection mode due to a supply problem (line voltage, water pressure, etc.). Try pressing and holding the On / Off button for 3 seconds.
B
Bryan MarshSep 4, 2025
Why is there too much foam in my Beko WTV 8735 XC0ST?
- M
  millsmichaelSep 4, 2025
  If there's too much foam in your Beko Washer, it might be because you're using improper detergents for the washing machine; switch to detergents suitable for washing machines. You may also be using too much detergent, so reduce the amount. Improper storage of detergent can also cause this, so store it in a closed, dry location. Some meshed laundry items may foam excessively, so use less detergent for those. Ensure you're putting the detergent in the correct compartment.
A
Angel WhiteSep 7, 2025
Why is there detergent residue in the detergent drawer of my Beko Washer?
- T
  thomasbruceSep 7, 2025
  If you find detergent residue in the detergent drawer of your Beko Washer, it could be because the detergent drawer was wet when you added the detergent; dry the drawer before adding detergent. The detergent itself might have gotten damp, so keep detergents closed in a humidity-free environment and avoid excessive temperatures. Low water pressure can also cause this, so check the water pressure. If the holes of the detergent compartment are blocked, clean them.
M
Monique HardingSep 9, 2025
What to do if my Beko WTV 8735 XC0ST Washer stopped shortly after the programme started?
- D
  Dylan ArmstrongSep 9, 2025
  If your Beko Washer stopped shortly after the program started, it might have temporarily stopped due to low voltage. The machine will resume running when the voltage restores to the normal level.

Beko WTV 8735 XC0ST Specifications

General

Model	WTV 8735 XC0ST
Type	Front Load Washer
Capacity	8 kg
Spin Speed	1400 RPM
Energy Efficiency Class	A+++
Weight	69 kg
Noise Level Washing	53 dB
Steam Technology	Yes
Number of Programs	15
Delay Start	Yes
Child Lock	Yes
Noise Level Spinning	76 dBA