This document is a user manual for the Beko WTV 8612 XSS Washing Machine, providing instructions for safe operation, installation, usage, and maintenance.
Function Description:
The Beko WTV 8612 XSS is an automatic washing machine designed for domestic use. It offers a variety of washing programs tailored for different fabric types, soil levels, and temperatures, ensuring efficient and gentle care for laundry. Key functions include prewash, main wash, rinse, and spin cycles, with options for temperature and spin speed adjustment. The machine is equipped with features like Delayed Start, Child Lock, and a Drum Cleaning program for hygiene. It also incorporates an automatic unbalanced load detection system and a loading door lock for safety. The product is designed to resume operation after a power interruption, enhancing user convenience.
Important Technical Specifications:
- Model Name: WTV 8612 XSS
- Rated Capacity: 8 kg
- Energy Efficiency Class: A+++ (Highest Efficiency)
- Annual Energy Consumption: 195 kWh (based on 220 standard washing cycles for cotton programs at 60°C and 40°C at full and partial load)
- Annual Water Consumption: 10559 liters (based on 220 standard washing cycles for cotton programs at 60°C and 40°C at full and partial load)
- Spin-drying Efficiency Class: B
- Maximum Spin Speed: 1200 rpm
- Remaining Moisture Content: 53%
- Standard Cotton Programs: Cotton Eco 60°C and 40°C
- Programme Time (Standard 60°C cotton, full load): 200 min
- Programme Time (Standard 60°C cotton, partial load): 179 min
- Programme Time (Standard 40°C cotton, partial load): 179 min
- Airborne Acoustical Noise Emissions (Washing/Spinning): 62/76 dB
- Dimensions (H x W x D): 84 cm x 60 cm x 59 cm
- Net Weight: 71 kg
- Water Inlet: Single
- Electrical Input: 230 V / 50Hz
- Total Current: 10 A
- Total Power: 2200 W
- Main Model Code: 9211
- Compliance: Commission Delegated Regulation (EU) No 1061/2010, WEEE Directive (2012/19/EU), RoHS Directive (2011/65/EU).
Usage Features:
The washing machine offers a user-friendly control panel with a Programme Selection knob, a display, and dedicated buttons for Delayed Start, Start/Pause, temperature adjustment, and spin speed adjustment, along with auxiliary functions.
- Program Selection: Users can choose from a range of programs including Cottons, Cottons Eco, Synthetics, Daily Xpress / Xpress Super Short, Mix 40, Woollens / Hand Wash, GentleCare, Down Wear, Outdoor / Sports, Dark Care / Jeans, Lingerie, Shirts, Hygiene, and Drum Cleaning.
- Temperature and Spin Speed Adjustment: Recommended values are displayed upon program selection, but can be adjusted to suit specific laundry needs. "No Spin" and "Rinse Hold" options are available.
- Auxiliary Functions: These include Prewash (for heavily soiled laundry), Fast+ (reduces program duration by 50%), and Extra Rinse (for sensitive skins). Some functions can be selected by pressing buttons for 3 seconds, such as Drum Cleaning and Child Lock.
- Delayed Start: Allows delaying the program start by up to 19 hours in 1-hour increments. Liquid detergents are not recommended when using this function to avoid staining.
- Loading Laundry: The machine automatically adjusts water amount based on laundry weight. Overloading is discouraged to maintain washing performance and prevent noise/vibration. The loading door is locked during operation and can be opened a few minutes after the cycle ends or when paused, provided the water level is suitable.
- Detergent and Softener Usage: The detergent drawer has three compartments for prewash, main wash, and softener. Specific instructions are provided for liquid, gel, tablet, starch, limescale removers, and bleaches, emphasizing correct dosage and placement.
Maintenance Features:
Regular maintenance is crucial for extending the product's service life and preventing common issues.
- Detergent Drawer Cleaning: The detergent drawer and its siphon piece should be cleaned regularly (every 4-5 washing cycles) to prevent detergent accumulation.
- Loading Door and Drum Cleaning: After each wash, ensure no foreign substances are left in the drum. If the bellow holes are blocked, they should be cleaned with a toothpick. Rust stains on the drum should be cleaned with stainless steel cleaning agents. For models with a dedicated program, Drum Cleaning should be performed every 2 months.
- Body and Control Panel Cleaning: The machine's body can be wiped with soapy water or mild gel detergents and a soft cloth. The control panel should only be cleaned with a soft, damp cloth.
- Water Intake Filter Cleaning: Filters at the ends of the water intake valves and hoses should be cleaned when dirty to prevent foreign substances from entering the machine. This involves closing taps, removing hoses, cleaning filters with a brush or pliers, and reassembling.
- Draining Remaining Water and Cleaning the Pump Filter: The pump filter should be cleaned every 3 months or when drainage issues occur. Instructions are provided for draining water from the machine, especially before transport or in freezing conditions, and for cleaning the pump filter. This involves unplugging the machine, opening the filter cover, and draining water into a large vessel.
Need help?
To Next Page
General
