What to do if my Beko WUXR81282WI won't drain?
If your Beko Washer isn't draining water, the water drain hose might be clogged or twisted. Clean or flatten the hose. Also, the pump filter might be clogged; clean the pump filter to resolve this issue.
How to open a Beko WUXR81282WI door when it's stuck?
If your Beko Washer's loading door cannot be opened, it could be due to a few reasons. The door lock might be activated because of the water level; drain the water by running the Pump or Spin programme. The machine might be heating up water or at the spinning cycle; wait until the programme completes. The child lock might be engaged; wait a couple of minutes for deactivation. The loading door may be stuck because of pressure; grab the handle and push and pull the door to release it.
Why won't my Beko Washer go to the spinning step?
If your Beko Washer doesn't switch to the spinning step, there might be an unbalanced load in the machine. The automatic unbalanced load detection system might be activated due to the laundry's distribution in the drum. Also, the machine will not spin if water is not drained completely; check the filter and the draining hose. Excessive foam might have occurred, activating the automatic foam absorption system due to too much detergent usage; use the recommended amount of detergent.
Why can't I start a program on my Beko WUXR81282WI Washer?
If your Beko Washer programme cannot be started or selected, the washing machine may have switched to self-protection mode due to a supply problem, such as line voltage or water pressure issues. To cancel the programme, turn the Programme Selection knob to select another programme. The previous programme will be canceled.
Why is my Beko WUXR81282WI Washer not rinsing well?
If your Beko Washer is not rinsing well, the amount, brand, and storage conditions of the detergent used may be inappropriate. Use a detergent appropriate for the washing machine and your laundry. Make sure the detergent is put in the correct compartment. Check the filter and the drain hose.
Why is my Beko WUXR81282WI immediately discharging water?
If your Beko Washer directly discharges the water it takes in, the draining hose might not be at an adequate height. Connect the water draining hose as described in the operation manual.
Why is there detergent residue in my Beko Washer's drawer?
If there's detergent residue in the detergent drawer of your Beko Washer, dry the detergent drawer before putting in detergent. Ensure the detergent has not gotten damp; keep detergents closed in a humidity-free environment and avoid excessive temperatures. Check the water pressure and ensure the holes of the detergent compartment are not blocked. Do not mix the softener with detergent. Clean the drum regularly.
Why did the colors of my clothes fade in my Beko WUXR81282WI?
If the colour of the clothes faded after washing in your Beko Washer, avoid loading the machine excessively. Ensure the detergent in use is not damp; keep detergents closed in a humidity-free environment and avoid excessive temperatures. Select the proper programme and temperature according to the type and soiling degree of the laundry.
Why is there too much foam in my Beko WUXR81282WI?
If too much foam forms in your Beko Washer, it could be due to using improper detergents for the washing machine; use detergents appropriate for the washing machine. Ensure you are using only a sufficient amount of detergent and that it was stored under proper conditions in a closed and dry location. If washing meshed laundry such as tulle, use smaller amounts of detergent. Make sure the detergent is put in the correct compartment.
General| Load Capacity | 8 kg |
|---|---|
| Energy Efficiency Class | A+++ |
| Spin Speed | 1200 rpm |
| Color | White |
| Type | Front Load |
To Next Page