Fig. E-2. Д-260.2 diesel engine (cross section):
1 – camshaft; 2 – tappet; 3 – valve; 4 – valve guiding bush; 5 – pushrod; 6 – turbocharger; 7 – rocker arm; 8
– roller; 9 – spring retainer (disk); 10 – split cones; 11 – inner spring; 12 – outer spring; 13 – support; 14 –
injector; 15 – fuel pump
*)
; 16 – boost fuel hand-pump; 17 – plug to bleed air from the oil pump head; 18 –
sealing collar
*) The distributive-type fuel pump shown in Fig. E-2 is not used at present. The Д-260.2/Д-
260.2С/Д-260.2S2 engines are equipped with in-line pumps Type 363-40 (YAZDA Open
Joint-Stock Company, Russia) or PP6M10P1f (Motorpal, Czechia).
The Д-260.2 engine may be equipped with the РР6М10Р1f-3492 fuel pump manu-
factured by the Motorpal Joint-Stock Company (Czechia).
To Next Page