23
●
Delete: Delete unwanted contacts from the address list, if private call contact is set as
channel default address or call number on one touch call, its unable to delete.
3.
All Call
While the contacts type as group call, you can select the menu to view its ID or
press PTT to call.
4. Manual Dial
You can manually input the private call number for calling or sending call alert ,
send message ,device check, remote monitor ,device enable ,device disable.
5. New Contact
You can add a private call contact to the contact list. When edit name, press*
key to delete, press # to switch input method, name input 16 characters at most; then
input number, the available number range is 1~16776415. After add a private call
contact successfully, on contacts list will show new contact.
Scan
1. Scan On/Off
While current channel add scan list and the list contain 2 channels at least,
you may enable the feature. Scanning allows the device to search the scan
list connected to the current channel to locate qualified channel for receiving
or voicing. During scanning, the icon flashes, when activities are
detected on a channel, the radio will stay on the channel to receive current
To Next Page
Loading...