34
Time Out Timer (TOT)
The purpose of TOT is to prevent any user occupy a channel for an extended
period. If a channel is busy, the time will be shorter. If the preset time expires, the radio
will generate beep and terminate transmission automatically. Via programming
software, you can set TOT as 15-495 second.
TX Permission
Digital Channel
This feature can restrict the channel if it is already in use you will be unable to
transmit. There are three options available: always, color code free, channel free, if
choose always, whenever press PTT key to transmit directly; If choose color code free,
you will be unable to transmit on the channel if the color code is already in use; If
choose channel free, you will be unable to transmit on the channel if it is already in use.
If the channel is busy, press PTT key a warning tone will sound.
Via programmable software to set it: Channels folder→Zone→a digital channel→TX
Parameters→Admit Criteria
Battery Saver
This function allows an idler radio to automatically enter battery saver mode, the
mode will extend battery service life, but response time may be delayed. You can set
battery saver time ratio as : 1:1、1：2、1:3、1:4, the time rate is smaller, the power saving
more evidently.
To Next Page
Loading...