EasyManua.ls Logo

Belifu FDES115 - Product Description and Operation; Basic Setup and Operation Instructions

Belifu FDES115
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
uncomfortable, reduce the intensity of stimulation to a
comfortable level. If the problem remains, please contact
your doctor.
11) Do not use this equipment in rooms where aerosol
(spray) and pure oxygen are used.
12) Please do not use this equipment near any highly
flammable substances, gases or explosives.
13) Please check that the cable and related connections are
in good condition before each use.
14) Turn off the device before using or removing the
electrode pad.
15) Electronic stimulators can only use electrode wires and
electrodes recommended by manufacturers.
Consult your doctor before using the device especially Consult your doctor before using the device especially
in the following cases:in the following cases:
Acute disease, especially patients suspected or suffering
from hypertension, thrombosis or malignant mass.
Patients with various skin diseases.
Patients with chronic pain disorders (e. g. metabolic
disorders) with reduced pain.
Patients undergoing medication.
Adverse reactionAdverse reaction
Skin allergies caused by electrode sheetpad gels and
electrode irritation burns are potential adverse reactions.
If the skin appears sensitive response, should be
discontinued and consult your doctor.
If the intensity of stimulation makes you feel
uncomfortable, reduce the intensity of stimulation to
a comfortable level, and if the problem persists, please
contact your doctor.
5. Product description5. Product description
5. 1 Instructions 5. 1 Instructions
Please make sure the battery is sufficient before use, if the
battery is insufficient, please charge it in time.
Do not use this product while charging.
1) Paste the gel on the electrode pad.
2) Insert the electrode plug into the treatment instrument.
3) Attach electrodes pad to the site to be treated.
4) Press the Power button and select the program (Refer to
7).

Related product manuals