Need help?Do you have a question about the Belimo 22G14-5C and is the answer not in the manual?
General| Enclosure Rating | IP65 |
|---|---|
| Medium | Water |
| Maximum Operating Pressure | 232 psi |
| Control Signal | 4-20 mA |
| Protection Class | IP65 |
| Operating Temperature | 32 212°F [0 100°C] |
Outlines the technical specifications of the gas monitors, including power supply, relays, operating temperature, and enclosure rating.
Provides guidelines for placing gas monitors based on gas density, coverage radius, and obstructions.
Details the recommended wire gauge and type for power and communication bus connections for the gas monitors.
Explains the step-by-step operational sequence of the gas monitors from power-up to gas level detection and alarm activation.
Describes how to set up a CAN network using a central communication module to manage multiple gas monitors.
Explains how to configure a CAN network where one monitor acts as the communication module in a client/server setup.
Outlines the general procedure for calibrating gas monitors using certified gas mixtures to ensure accuracy.
Details the specific calibration steps for electro-chemical and catalytic sensors like CO, NO2, CH4, NH3, and CL2.
Describes the calibration process for refrigerant (type 13, 20) and VOC (type 01) sensors using span gas.
To Next Page