17
GETTING STARTED
Dynamic/Fixed IP (1483 Bridge)
Select “Dynamic/Fixed IP (1483 Bridge)” from the
menu that appears and press “Next.”
In most cases the IP address is dynamic, in which case all you need to do is
enter the correct VPI and VCI values and select the correct encapsulation
mode (check with your ISP if you are unsure), then click “Apply Changes.”
If your connection uses a static IP address change the “IP Assigned
by ISP” option to “No” and enter the address details supplied by
your ISP. Then enter the above values, and click “Apply Changes.”
To Next Page
Loading...
