Troubleshooting
section
31
1
2
3
4
5
6
3. The exact window that opens will vary depending on the
model of wireless card you have; however, any of the utilities
should have a list of “Available Networks”.
Available networks are wireless networks to which you can connect.
If you are using a Belkin 802.11g (G Plus) Router, or Belkin 802.11g
(54g) Router, “Belkin54g” is the default name.
If you are using a Belkin 802.11b Router, the default name should
be “WLAN”. If you are NOT using a Belkin Router, please consult
your router manufacturer’s user manual for the default name.
The name of your wireless network appears in
“Available Networks”.
If the correct network name is listed in the “Available Networks”
list, please follow the steps below to connect wirelessly:
1. Click on the correct network name in the “Available
Networks” list.
2. If the network has security (encryption) enabled, you
will need to enter the network key. Click “Connect”.
For more information regarding security, see the page
entitled: “Securing your Wi-Fi Network” on page 19 of
this User Manual.
3. Within a few seconds, the tray icon in the lower right-hand
corner of your screen should turn green, indicating a
successful connection to the network.
If you are still unable to access the Internet after connecting to
the wireless network, please contact Belkin Technical Support.
To Next Page
Loading...
