(1) (2) (3)
(4)
Internet WAN
The “Internet WAN” tab is where you will set up your Router to connect
to your Internet Service Provider. The Router is capable of connecting
to virtually any ADSL Service Provider’s system provided you have
correctly configured the Router’s settings for your ISP’s connection type.
Your connection settings are provided to you by your ISP. To configure
the Router with the settings that your ISP gave you, click “Connection
Type”
(1) on the left side of the screen. Select the connection type you
use. If your ISP gave you DNS settings, clicking “DNS”
(2) allows you to
enter DNS address entries for ISPs that require specific settings.
When you have finished making settings, the “Internet Status” indicator
will read “Connection OK” if your Router is set up properly.
[insert 9630_Internet_WAN.tif]
(1)
(2)
To Next Page
Loading...
