4. Enter the IP address of the radius server into the “Radius
Server” fields.
5. Enter the radius key into the “Radius Key” field.
6. Enter the key interval. Key interval is how often the keys are
distributed (in packets).
7. Click “Apply Changes” to finish. You must now set all clients to
match these settings.
[insert 9630_WPA2_Radius.tif]
Setting WPA2-Personal (PSK)
1.
From the “Security Mode” drop-down menu, select “WPA/WPA2-PSK
(PSK)”.
2. Select “WPA2-Personal (PSK)” for Authentication.
3.
For Encryption Technique, select “AES” . This setting will
have to be identical on the clients that you set up.
4. Enter your Pre-Shared key. This can be from eight to 63 characters
and can be letters, numbers, or symbols. This same key must be
used on all of the clients that you set up. For example, your PSK
might be something like: “Smith family network key”.
To Next Page
Loading...
