• Top Seat • Bottom Seat • Mounting tube • Grab bar • Seat pad • Seat harness
• Lap belt • Hardware
1 2
PARts list
tOOls nEEdEd
instAllAtiOn
• Phillips head screwdriver • Adjustable wrench
mOunting tuBE instAllAtiOn – usE hARdWARE “A”
1. Place mounting tube on the seat as shown. (Diagram 1)
2. Slide each bolt through top of the seat, through the holes in the tube and secure with
washer and nylock nut. (Diagram 2).
To Next Page
Loading...
