To Next PageTo Next Page
Need help?Do you have a question about the Bell Logic and is the answer not in the manual?
General| Brand | Bell |
|---|---|
| Model | Logic |
| Category | Log Splitter |
| Language | English |
Emphasizes reading all instructions for excellent results and best performance.
Log splitters comply with European safety regulations like EN 609-1 and CEI EN 60204-1.
Lists and identifies various parts of the LOGIC log splitter with reference to diagrams.
Explains the importance and meaning of standard graphic symbols used on the machine.
Details dimensions, weight, force, capacity, oil, and supply specifications.
Specifies maximum log sizes for splitting and advises on knots or twisted fiber.
Lists recommended hydraulic oils for the cylinder and warns against using other grades.
Outlines hazards, improper use consequences, and general safety rules for operation.
Lists essential safety rules for operating the log splitter, including operator limitations and work area safety.
Instructions for fitting the wheels onto the axle and securing them with plastic caps.
Explains the activation of the log splitter using the motor drive button and hydraulic control lever.
Describes loosening the bleed screw during use and tightening it for transport.
Details connecting the machine to power and correctly positioning the log on the beam.
Explains the two-hand activation, lever control for speed/power, and safe operation of the log pusher.
Warns against forcing the splitter, overheating, and advises on handling difficult logs.
Step-by-step guide for replacing hydraulic oil, including draining, filling, and checking levels.
Instructions on how to check and refill the hydraulic oil level between specific notches.
Details the process of sharpening the wedge using a file for optimal performance.
Provides steps to safely remove a log that has become jammed in the splitter.
Introduces a table for diagnosing problems and lists crucial safety warnings for troubleshooting.
Addresses issues like logs failing to split, incorrect positioning, or wedge problems.
Covers problems with rod movement, oil leaks, and seal wear.
Explains the warranty period for the product and installed spare parts.
Lists conditions under which the guarantee is voided, such as misuse or unauthorized repairs.
Provides necessary information for ordering spare parts or requesting repair work.
