Bellababy BLA-228 - Maintenance Tips

3. Converting the Baby Walker into a push walker
1. 1. Remove the bumper strip.
2. 2. Push the buttons on each sides
of the top tray to adjust its angle.
3. 3. There are three angles to choose
from, and once adjusted to the
required setting the walker mode is
ready for use.
Please check and maintain your walker regularly to
protect your child from unexpected injuries:
1. When cleaning the cloth cover, avoid scrubbing it
in water, instead use a household implement
such as a brush or sponge to gently wipe away
any stains.
2. Avoid using or storing the walker in a damp (wet),
cold, or hot environment for extended periods of
time.
3. When not in use, please pay attention to
maintenance and care, and keep it in a safe place.
4. Check regularly for loose or damaged parts or
broken wires, and replace damaged parts if
necessary.
Maintenance tips