4. Grill injector.
1. Remove the appliance top/rear
panel.
2. Remove the grill burner top cover.
3. Disconnect the gas supply pipe
from the grill tap, and injector
adaptor, and remove.
4. Unscrew and remove the screw
which secures the grill burner cap
c/w injector adaptor to the burner
mixing tube.
5. The grill injector can now be
removed.
6. Re-assemble with new injector in
reverse order.
5. Oven injector.
1. From inside the oven, loosen the
fixing screw for the oven burner
cover and withdraw the cover.
2. Unscrew the oven burner fixing
screw at the left hand end of the
oven burner.
3. Slide the oven burner to the left to
gain access to the oven injector
situated on the right hand side.
4. Remove the oven injector and
replace as necessary.
5. Ensure that a new aluminium
sealing washer is used when fitting
the new injector.
6. Re-assemble in reverse order.
Conversion Instructions (LPG - Natural Gas)
33
27353 00 - Belling GG720 14/6/07 14:59 Page 35
To Next Page
Loading...
