During the WAIT mode, the desired cooking function can be selected by touching P
sensor. Every touching of P sensor change the oven functions as below. Some of
these cooking functions may not be exist according to your model.
Lamp → Defrost → Turbo → Upper and Lower → Upper and Lower with Fan → Grill
(with/without turnspit) → Double Grill (with/without turnspit) → Double Grill with Fan
(with/without turnspit)
The operated heaters and accessories are shown on the display, according to
selected function.
When cooking function selected via P sensor, pre-adjusted temperature value will
be shown on the temperature display and this can be adjusted by firstly touching
thermostat and after that touching ˄ and ˅ sensors which are on the sides of the
display. The temperature can be adjusted within 50-275 °C.
After adjusted desired function, temperature and time, the oven can be started with
START/STOP sensor.
4.2. HOW TO USE THE TOUCH CONTROL UNIT
15
To Next Page
Loading...
