21
Pan anti-tilting wire
To locate grid correctly in the cavity, put it to any rack
and push the grid up to the end.
The pan anti-tilting wire must be placed inside of the
cavitiy.
Removal of wire shelf
1
2
Pull the wire shelf as shown in the picture. After releasing
it from clips, lift it up.
Installation of the Shelves
5.
Rack
4.
Rack
3.
Rack
2.
Rack
1.
Rack
WARNING- Fit the grid correctly into any correspondingrack
in the oven cavity and push it to the end.
To Next Page
Loading...
