Bellini BDW96W - Basket Types and Adjustment

9
Lower basket
Type
Item
Dessert plate
G
H
I
Dinner plate
Soup plate
Dessert plate
Upper and Lower basket Folding racks
Folding racks consisting of two parts
that are located on the upper and lower
basket of your machine are designed in
order to let you place big items easier
as pots, pans, etc. If requested, each
part can be folded separately, or all of
them can be folded and larger can be
obtained. You can use folding racks by
rasing then upwards, or by folding.
For optional
Upper Baske
t
Lower Basket
2
1
1
2
Basket height adjustment mechanism on the upper basket of your machine is designed
to let you adjust the height of your upper basket upwards or downwards,without
removing it from your machine when it is full,and create large spaces at the top or
bottom area of your machine as needed.Basket of your machine is set to lower position
in factory settings.
1. To lower the upper basket, press the levers located at the left and right sides of the
upper basket and push the upper basket downwards slightly at the same time.
2. To raise the upper basket, just pull the upper basket upwards without operating any
levers.
NOTE In loaded basket adjustment mechanism, make sure that both sides are in the
same position(up or down).
Upper Basket Height Adjustment
To lower position
To upper position
1
2
H9 H1
G9 G2
I9
I2
G1
I1
10
Upper ba
sket can be adjusted for height by putting
wheels of different height into the rails. Long items,
serving cutlery, salad servers or knives should be
placed on the shelf so that they do not obstruct the
rotation of the spray arms.
Attention:
GSM Sales Pty Ltd ABN: 53 007 582 475
For Warranty and technical queries: 1300 373 199 Aus Or 0508123108 NZ www.belliniappliances.com.au
Model: BDW96W-F FINELINE: 5104010 Aus/NZ, BDW96X-F FINELINE: 5104011 Aus/NZ 45cm Freestanding Dishwasher