EasyManua.ls Logo

Bellini BDW96W - Dishwasher Operation Issues; Cleaning and Appearance Issues

Bellini BDW96W
26 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
21
Problem Possible Causes What To Do
Dishwasher
doesn't run
Fuse blo
wn, or
th
e circuit breaker acted
Replace fuse or
reset circuit breaker. Remove any other appliances
sharing the same
circuit
with the dishwasher.
Power supply
is not turned on
Make sure the
dishwasher is turned on and the door is closed securely.
Make sure the power cord is prope
rly plugged into the wall socket.
Wa
ter press
ure is low
Check that the water
supply is connected properly and the water is turned
on.
Drain pump
doesn't stop
Overfl
ow
The system is
designed to detect an overflow. When it does, it shuts off
the circulation pump and turns on
the drain pump.
Noise
Some audible sounds are normal Sound from dete
rgent cup opening.
Utensils are not s
ecure in the baskets or
something small has drop
ped into the
basket
To ensure everything is secured in the dishwasher
.
Motor hums
Dishwa
sher
has not been used regularly. If you do not use it often,
remember to set
it to fill and pump out every week, which will help keep
the
seal
moist.
Suds in the tub
Imprope
r deter
ge
nt
Use only the sp
ecial dishwasher detergent to avoid suds. If this occurs,
open the dishw
asher
and let suds evaporate. Add 1 gallon of cold water
to the tub. Clos
e and latch the dishwasher, then start the "soak" wash
cycle
to dr
ain out the water... Repeat if necessary.
S
p
illed
rinse
agent
Alw
a
y
s
wipe up rinse agent spills immediately.
Stained tub
interior
Detergent
with colorant
was used
Make sure that the deterg
ent is the one wi
thout colorant.
Dishes and
flatware not
clean
Improper
program Improper
basket
loading
Make sure that t
he action of the detergent dispenser and spray arms are
not blocked by
large dishw
are. Select a stronger programme.
Spots and filming
on glasses and
flatware
Extremely hard
water
Lo
w inlet temperature
Overloading the dishwa
sher
Improper loading
Old or damp powder deter
gent
Empty rinse agent dispenser
Incorrect dosage
of detergent
To
remo
ve spots from glassware:
1.
T
a
ke
out all metal utensils out of the dishwasher.
2. Do not add
detergent.
3. Choose
the longest
cycle.
4. Start the
dishwasher and allow it to run for about 18 to 22 minutes,
then it will be
in the main wash.
5.
Open the door
to pour 2 cups of white vinegar into the bottom of the
dishwasher.
6. Close
the door and
let the dishwasher complete the cycle. If the
vinegar does not
work: Repeat as above, except use 1/4 cup (60
ml)of
citric
acid
cr
ystals instead of vinegar.
Cloudiness
on
glassware
Combination of
soft wate
r and too much
detergent
Use less detergent if
y
ou have soft water and select a shortest cycle to
wash the glassware and to get th
em clean.
GSM Sales Pty Ltd ABN: 53 007 582 475
For Warranty and technical queries: 1300 373 199 Aus Or 0508123108 NZ www.belliniappliances.com.au
Model: BDW96W-F FINELINE: 5104010 Aus/NZ, BDW96X-F FINELINE: 5104011 Aus/NZ 45cm Freestanding Dishwasher

Related product manuals