Belmont Voyager 2 User Manual

DENTAL UNIT AND CHAIR
INSTALLATION
INSTRUCTIONS
IMPORTANT
This manual provides installation instructions for Belmont VOYAGER II.
The instructions contained in this booklet should be thoroughly read and
understood before attempting installation of chair and unit.
After the installation is completed, file this manual and refer back to it for
future maintenance.

Belmont Voyager 2 Specifications

General

Type	Dental Chair
Manufacturer	Belmont
Model	Voyager 2
Headrest	Adjustable
Assistant's Instrumentation	Optional
Backrest Angle	Adjustable
Power Requirements	115 VAC or 230 VAC, 50/60 Hz (depending on configuration)
Seat Height Adjustment	Adjustable via electric motor

Summary

Overall View and Major Components

Dimensions and Specifications

Dental Unit Dimensions

Provides detailed measurements and diagrams for the dental unit.

Dental Unit Specifications

Lists technical specifications for chair and unit sections.

Installation Instructions

Pre-Installation Requirements

Covers general, setting, piping, and utility requirements before installation.

Unpacking and Parts Check

Details the unpacking procedure and checks for all delivered packages and parts.

Stop Valve Installation

Instructions for installing water and air stop valves.

Chair Base Installation

Steps to remove and position the chair base section from its pallet.

Unit Section Installation

Guide for installing the utility frame and connecting wires to the terminal block.

Utility Section Plumbing and Tubing

Connects drain, vacuum hoses, water, air lines, and internal tubings.

Chair Upper Part Assembly

Instructions for assembling the backrest, seat, armrests, and headrest.

Dental Light Installation

Procedure for mounting the light post and connecting the light cable.

Speed Adjustment for Chair

Hydraulic Diagram for Chair

Electrical Diagram for Chair

Flow Diagram for Unit (Central Vacuum Type)

Electric Diagram for Unit