ES6603 PIN DESCRIPTION
CE 41 O Center error output reference to V125 pin 36
.
MNTR 42 O Monitor out signal. Output is selectable by register settings
.
LCN, LCP
43, 44 I Lens shift offset cancellation low-pass filter pins. Connect LCN to LCP via a capac
-
itor
.
V33 45 P 3.3V output buffers power supply.
SCLK 46 I Serial clock from ES66x8.
SDATA 47 I/O
Serial data I/O.
SDEN 48 I Serial data enable. Enabled by an active-high signal.
RX 49 I Reference resistor. Connected to ground via a 12.0k , 1% resistor..
MEV 50 I RFDC bottom envelope. Connected to VPA pin 58 via a capacitor
.
VNA 51 G RF block and serial port ground
.
FNN, FNP 52, 53
O Differential outputs of equalizer/filter.
DIP, DIN 54, 55
I Differential analog inputs to the RF single-end output buffer and full wave rectifier.
BYP 56 I AGC amplifier gain bypass. Tied to VPA via a capacitor.
RFAC 57 O Single-ended RF output.
VPA 58 P RF block and serial port power supply
.
AIP, AIN 59, 60
I Differential AGC amplifier inputs.
ATON, ATOP 61, 62
O Differential attenuator outputs.
RFSIN 63 I Single-ended RF signal attenuator input.
RFDC 64 O Single-ended RF summing output.
ES6603 Pin Descriptions List (Continued)
Name Pin Numbers I/O Definition
To Next Page
Loading...