EasyManua.ls Logo

Belson BSA-3750 - Page 21

Belson BSA-3750
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DVD - DivX Player - BSA3750
21
ES6603 DEVICE INTERFACES
The table below lists the device interfaces for the ES6603.
ES6603 Device Interfaces
Name
Pin Numbers I/O Definition
AGC Interface
59, 60 I Differential AGC amplifier inputs [AIP] and [AIN].
Automatic Laser
Power Control (APC)
Interface
21 O APC laser power control for DVD [DVDLD].
22
O APC laser power control for CD [CDLD].
23
I APC photo diode in for DVD [DVDPD].
24
I APC photo diode in for CD [CDPD].
26
I APC input on/off control [LDON].
CD/DVD Photo
Detector Interface
3:6 DVD differential phase detector matrix inputs [A2], [B2], [C2], and [D2].
9:12 I DVD single-ended phase detector matrix inputs [A], [B], [C], and [D]
.
13:16 I CD photo detector interface inputs [CD_A], [CD_B], [CD_C] and [CD_D].
17, 18 I CD side beam photo detector tracking outputs [CD_E] and [CD_F].
Embedded Servo DSP
Interface
26
I APC input on/off control [LDON] from embedded servo DSP.
33 I/O Linking signal and mirror monitor control I/O [LINK].
34 O Defect output [DFT] to embedded servo DSP
.
38 O Pull-In signal [PI] to embedded servo DSP
.
39 O Tracking error [TE] to embedded servo DSP
.
40 O Focusing error [FE] to embedded servo DSP
.
41 O Center error [CE] to embedded servo DSP..
46 I Serial clock [SCLK] from embedded servo DSP.
47 I/O Serial data I/O [SDATA] for embedded servo DSP.
48 I Serial data enable [SDEN] from embedded servo DSP
.
Filtering and
Reference Voltage
7, 8 I Diff
erential phase tracking low-pass filters [CP] and [CN].
20 O DC bias reference voltage [VC].
30 I Mirror low-pass filter [MLPF].
36 O Servo block reference voltage [V125].
43, 44 I Lens shift offset cancellation low-pass filters [LCP] and [LCN].
64 O Single-ended RF summing output reference [RFDC].
Power and Ground
19 P Servo block port power supply [VPB].
25 G Servo block ground [VNB].
37 P 2.5V reference voltage servo output power supply [V25].
45 P 3.3V output buffers power supply [V33].
51 G RF block and serial port ground [VNA].
58 P RF block and serial port power supply [VP
A].
AGC and Filter
Interface
1,2 I Differential RF signal attenuator inputs [DVDRFP] and [DVDRFN].
52, 53 O Differential normal filter outputs [FNP] and [FNN].
54, 55 I Differential analog RF buffer inputs [DIP] and [DIN].
57 O Single-ended RF output [RFAC].
63 I Single-ended RF signal attenuator input [RFSIN].
61, 62 O Differential attenuator outputs [ATO
P] and ATON].

Related product manuals