Beltronics Vector 940 - Feature Descriptions (Scroll, Display)

Feature 4 – Safety Warning System
®
Voice or Tone
(Model V960)
When “
SSWWSSvv oo ii cc ee
” is selected, unit will provide
Digital Voice announcements when SWS
™
transmitters
are detected. Factory setting is “
SSWWSSvv oo ii cc ee
”. When
“
SSWWSStt oo nn ee
” is selected, Digital Voice is replaced by
tone/clicking only. Factory setting is “
SSWWSSvv oo ii cc ee
”.
Feature 5 – Audio/Visual Scroll Rate
When “
SSCCRRss ll oo ww
” is selected, unit will provide a slow
cycling of audio/visual messages. When “
SSCCRRffaa ss tt
” is
selected, unit will provide a fast cycling of
audio/visual messages. Factory setting is “
SSCCRRss ll oo ww
”.
Feature 6– Inverted Display Feature
When selected, your unit can be mounted to the
visor using the hook & loop fastener upside down
and the display will remain right reading. “Upside
down” mounting may allow for easier access to the
unit’s functions.
Note: Inverted display is ON when the check mark symbol
is FLASHING; inverted display is OFF when the underscore
line is flashing.
13
k
k
k