EasyManua.ls Logo

BEMIS bio Bidet A8 - Product Components Overview

Default Icon
19 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22 23
Temperature Adjustment (Water/Seat)
• The temperature of seat and water can be adjusted by
pressing or button.
• There are 4 levels (Room temp-Low-Medium-High)
Battery Alarm
• Change the batteries if the battery icon on LCD is flickering
(LED on the front also flickers)
Massage
• Press “Massage” to activate rhythmical wash for massage
effect when you are using “Cleansing” or “Bidet”.
• Press the button again to release this function.
Kids
• Press “Kids” to change all functions to be suitable for children.
It will automatically operate from cleansing (2 min) to dry (3 min)
with adequate water pressure and nozzle position.
• This unit should be used under the supervision of an adult.
Auto
• Press “Auto” during the operation of “Cleansing”,
Cleansing wash (20 sec) - Oscillating wash (20 sec) -
Massage (80 sec) - Dry (3 min) will operate.
Nozzle Position
• Nozzle position can be adjusted by pressing
FRONT or REAR button to 5 levels.
• Nozzle position will remain.
OPERATION (CONT.)
Water Pressure (Cleansing/Bidet)
• Water spray pressure can be adjusted by pressing
LOW or HIGH button to 5 levels.
• Water pressure level will remain.
Aerated Spray
• This gentle but strong spray cleanses better while using
“Cleansing”, “Bidet” or “Kids”.
• The aerated spray is released if this button is pressed again.
LED
• Press the button to activate the light on/off.
• Delicate light will help the user to use the toilet without
turning the bathroom lights on during night time.
Deodorization
• When the appliance is in use, the deodorizer will work a
maximum of 20 minutes automatically.
• When a user stands up, the function stops after 1 minute.
Sound
• Press the button to enable the beeping sound.
• To disable, press the button again.

Related product manuals