Viewing the timer setting
Press the TIMER SET key.
Press the + or – key to check the power-on time of the set timers one by one.
To check the power-off time, press the ▲ key.
Press the + or – key to check the power-off time of the set timers one by one.
To delete selected setting, press the C key.
12
User Instructions Continued
200797_1
Setting the timer
Up to 10 different timer settings can be programmed.
Each timer setting has a day, power-on time and power-off time.
The maximum duration of each timer setting is 23 hours 50 minutes.
If the power-off time of the timer setting falls on the following day, it is unnecessary to
set the day-just set the power-off time.
Press the TIMER SET key, the timer number starts blinking (01-10).
Press the + or – key to select a timer number.
Press the TIMER SET key, the cursor on the left side of the day blinks.
Press the ▲ or ▼ key to move the cursor to the corresponding day. Press the + key to
add a corresponding day, or press the - key to delete a day.
Press the TIMER SET key to set the on time. The hour digit will start blinking.
Press the + or – key to set the hour.
Press the TIMER SET key. The minute digit will start blinking.
Press the + or – key to set the minute.
Press the TIMER SET key to set the off time. The hour digit will start blinking.
Press the + or – key to set the hour.
Press the TIMER SET key. The minute digit will start blinking.
Press the + or – key to set the minute.
Press the TIMER SET key. The temperature digit will start blinking.
Press the + or – key to set the temperature.
Press the TIMER SET key to continue with the timer setting or press the OK key to confirm
the setting.
Activating the timer
Press the TIMER ON / OFF key to activate the timer function.
NOTE: When the timer is active, the heating level must be manually selected. If the
heater function is not selected; only the flame effect goes on at the set power-on time.
Automatic heating mode
Press the IC key to activate automatic heating mode. The AUTO icon appears on the
display.
When the automatic heating is turned on, the heater automatically changes the
heating level depending on the set temperature and the ambient room temperature.
To Next Page
Loading...
Need help?
General
