S.p.A.
RT 80
2
CONTENTS
1) Introduction
2) After-sales service and Warranty
3) Technical details
4) Packing and transport
5) Accessories
6) Safety rules and limits on use
7) Starting and stopping
8) Operating and regulating the machine
9) Mill assembling
10) Maintenance and lubrication
11) End-of season servicing
12) Possible problems and solutions
13) Instructions for a good operation of the
machine
1 -INTRODUCTION
We are pleased that you chose a machine built by BENASSI SPA.
This booklet provides the information and data needed to preserve and use the machine properly.
The more you get to know your farming machine, the better you will work. Therefore we strongly suggest that before starting work, you carefully read and
understand this "USER AND MAINTENANCE" booklet.
You will find important information on using the machine which will allow you to get the most of its technical capacities. You will also find precious
information on how to care for it and service it, in terms of safety, and a guide on running and servicing it in the best possible way during the lifetime of your
machine.
For reasons of technical progress, BENASSI SPA reserves the right to modify the mechanical parts, the finishes and the accessories. The data
regarding measures, weights and performance are specified within DIN tolerance. The figures, the descriptions and the technical data are not binding.
2 - AFTER-SALES SERVICE AND WARRANTY
BENASSI SPA provides its customers with an after-sales service for solving any problem involving the use and the maintenance of its machinery. All the
machines are guaranteed for defective material for 12 months (one year) from purchase. For any need, refer to your dealer.
N.B. IMPORTANT WARNING FOR YOUR SAFETY
Always use original BENASSI SPA products, spare parts and accessories; any modification or application using non-original parts exempts BENASSI
SPA from any responsibility
BENASSI SPA disclaims all responsibility in case of application of accessories made by other firms to its machines: Any warranty will be given for said
applications even when such modifications have been tested by boards of control or certified by public bodies as tests on single machines are not valid.
BENASSI SPA W ISHES YOU A PLEASANT W ORK W ITH OUR MACHINES
N.B. PAY SPECIAL ATTENTION TO THE INSTRUCTIONS MARKED OUT BY THE
FOLLOWING SIGN
THIS SYMBOL INDICATES DANGER: FAILURE TO COMPLY WITH THESE
INSTRUCTIONS MAY CAUSE INSIDIOUS OR EVEN FATAL INJURY.
3 – TECHNICAL DETAILS
LIST OF MACHINE PARTS
1. Accelerator
2. Stop engine
3. Clutch lever
4. Clutch adjuster
5. Handle-bar adjuster
6. Tool-case
7. Start engine
8. Fuel inserting
9. Air filter
10. Oil lev el
11. Power take-off
12. Driving wheel
13. Mill
14. Mills bonnet
15. Bonnet adjustment
16. Oil inlet
17. Mills lev er
18. Gearbox lever
19. Blocking push button
To Next Page
Loading...