19
GENERAL OPERATION
1. Check the product, its battery pack and charger as well as accessories
for damage before each use. Do not use the product if it is damaged
Double check that accessories and blade are properly fixed.
or shows wear.
2.
3. Check the battery status. Recharge if necessary.
4. Always push the product by its handle. Keep the handle dry and free from
lubricant to ensure safe support.
5.
people entering the working area. Always let the product come to complete
stop before leaving it unattended.
6. Do not overwork yourself. Take regular breaks to ensure you can concentrate
on the work and have full control over the product.
STARTING/STOPPING
1. Insert batteries. NOTE: lawn mower will NOT operate unless both batteries are
installed.
2. Plug the safety key into the slot fully.
3. Stand behind the starting lever.
4.
towards the handle.
5.
6.
Release the bail to stop the mower.
MOWING
1. Make sure that the lawn is clear of stones, sticks, wire or other objects that
could damage the product or its product.
2. Do not cut wet grass because it tends to stick to the underbody of the mower,
preventing the proper discharge of grass clippings, and it could also cause you
to slip and fall.
3.
lawn. In the autumn, lawns should only be cut if there is growth.
To Next Page
Loading...
