EasyManua.ls Logo

Benchmark 5125-025 - General Safety Warnings; Eye, Ear & Lung Protection; Electrical Safety

Benchmark 5125-025
30 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
GENERAL SAFETY WARNINGS
WARNING: Before using this tool or any of its accessories, read this manual
and follow all Safety Rules and Operating Instructions. The important precautions,
safeguards and instructions appearing in this manual are not meant to cover all
possible situations. It must be understood that common sense and caution are
factors which cannot be built into the product.
EYE, EAR & LUNG PROTECTION
ALWAYS WEAR EYE PROTECTION THAT CONFORMS WITH CSA REQUIREMENTS
OR ANSI SAFETY STANDARD Z87.1
FLYING DEBRIS can cause permanent eye damage. Prescription eyeglasses
ARE NOT a replacement for proper eye protection.
WARNING: Non-compliant eyewear can cause serious injury
if broken during the operation of a garden tool.
WARNING: Use hearing protection, particularly during extended periods
of operation of the tool, or if the operation is noisy.
WEAR A DUST MASK THAT IS DESIGNED TO BE USED WHEN
OPERATING A GARDEN TOOL IN A DUSTY ENVIRONMENT.
WARNING: Dust that is created by power sanding, sawing, grinding, drilling,
and other construction activities may contain chemicals that are known to cause
cancer, birth defects, or other genetic abnormalities. These chemicals include:
Lead from lead-based paints
Crystalline silica from bricks, cement, and other masonry products
Arsenic and chromium from chemically treated lumber
The level of risk from exposure to these chemicals varies, according to how often
this type of work is perfor
med. In order to reduce exposure to these chemicals,
work in a well-ventilated area, and use approved safety equipment, such as a dust
mask that is specifically designed to filter out microscopic particles.
ELECTRICAL SAFETY
WARNING:
to the tool, use proper circuit protection.
To avoid electrical hazards, fire hazards or damage
WARNING: Ventilation openings in batteries and chargers must always
be open to allow cooling air to circulate freely. Air vents that are blocked,
restricted or covered may result in the battery or charger overheating.
Overheating may lead to damage to the tool o
r cause a re, resulting in
possible serious injury.

Related product manuals