EasyManua.ls Logo

Benchmark 5140-010 - Page 15

Benchmark 5140-010
26 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
5150-004
13 AMP ELECTRIC DETHATCHER
Starting + Stopping
WARNING
Before switching on the lawn dethatcher, make sure that it is not in contact with any
foreign objects. Keep your feet and hands a safe distance away from the rotating
tines and the ejector opening. Failure to comply with these warnings can result in
severe personal injury.
To start
1. Keep pressing safety lock button.
2. With the safety lock button pressed, simultaneously pull the switch lever back
with the other hand on the upper handle. Hold the switch lever and upper handle
together to operate.
To stop
1. Release the switch lever to stop and make sure the tines come to a complete
stop.
WARNING
The tine cylinder continues to run for a brief period after the unit has been switched
o. Do not tilt or carry the unit while the motor is still running and do not touch the
cylinder while it is still rotating. Failure to comply could result in severe personal
injury.
Overload Protection
The overload protection will be activated in the following circumstances:
1. A buildup of scarified material around the cutting device.
2. If the material scarified is larger than the motor capacity.
3. Where there is too much resistance against the cutting device.
When the circuit breaker has been activated switch o the product and disconnect
from the power supply.
Let the product cool down and eliminate the cause before using the product again.
General Operation
WARNING
If the product strikes a foreign object stop the motor. Switch the product o,
disconnect it from the power supply and let it cool down. Inspect the product
thoroughly for damage. Have any damage repaired before restarting.
WARNING
Extensive vibration of the product during operation is an indication of damage. The
product should be promptly inspected and repaired.
Check the machine, its power cord and plug as well as accessories for damage
before each use. Do not use the machine if it is damaged or shows wear.
Double check that accessories are properly fixed.