10
5150-004
13 AMP ELECTRIC DETHATCHER
OPERATING INSTRUCTIONS
NOTE: Read operator’s manual
INTENDED USE
This product is intended for domestic, dethatching of lawn. This appliance is not
intended for dethatching on hard materials such steel rod, stones and other hard
materials which exceeds its cutting capacity and will damage the tines.
WARNING
To avoid injury from unexpected starting or electrical shock, during assembly or
adjustment, do not plug the power cord into a source of power.
ASSEMBLY
Assemble the lower handle
1. Install the lower handle positioning seat on the base, Note: There are 3 gears at
the base installation position, which represent 3 dierent installation heights.
No. 1 handle
2. Tighten the angle knob clockwise to fix it on the base.
Note: The rotation direction of loosening and locking is marked on the angle
knob.
Angle knob
Lower handle
Base
Lower handle
To Next Page
Loading...