5140-014
14” 40V MAX CORDLESS
& BRUSHLESS GARDEN TILLER
20
5. Insert the hex bolts through the holes and secure them with the self-locking nuts
(Fig. 10).
IMPORTANT: The tines must be set in the correct turning direction. Note the way
the old tines came o and replace the new ones exactly the same way.
TRANSPORTATION
• Switch the product o. Ensure that the wheels are set to the transport position
(see Fig. 5).
• Always carry the product by its transport handles.
• If you are transporting the tiller in a vehicle, brace it properly to protect it from
heavy impact or strong vibrations.
• Secure the product to prevent it from falling over or slipping.
Repair
This product does not contain any parts that can be repaired by the consumer.
Storage
• Examine the cordless tiller thoroughly for worn, loose, or damaged parts.
• Remove the batteries from the cordless tiller before storing.
• Clean the product as described above.
• Store the product and its accessories in a dark, dry, frost-free, and well-ventilated
place.
• Always store the product in a place that is inaccessible to children.
• The ideal storage temperature is between 50°F (10°C) and 86°F (30°C).
• We recommend using the original package for storage or covering the product
with a suitable cover or enclosure to protect it against dust.
To Next Page
