33
CUTTING HEIGHT ADJUSTMENT LEVER (2)
There are seven positions for this lever
(shown as «1» to «7» on the label),
which correspond to various heights
between 30 and 90 mm.
Lower Cutting Height
Settings has more potential for scalping
especially on uneven terrains.
REVERSE MODE OPERATION BUTTON (RMO) (11)
The reverse mode operation knob is located on the RH console to the left of the
blade start/stop knob. The blades will stop when traveling reverse. When traveling in
reverse, press the RMO button to reengage the rotation of the blades.
When traveling in reverse the
blades will stop. If the blades are
rotating when traveling reverse, press
the RMO button. Turning off the Blade
Start/Stop Knob (12) or restarting the
engine will unlock the reverse mowing.
Mowing in reverse is not recommended.
SAFETY RECOMONDATIONS
The machine must only be used for the purpose for which it was
designed (cutting grass). Do not tamper with or remove the safety devices fitted on
the machine.
REMEMBER THAT THE USER IS ALWAYS RESPONSIBLE FOR DAMAGE AND INJURY
TO OTHERS. Before using the machine：
1. Read the general safety regulations, paying particular attention to driving and
cutting slopes.
To Next Page
Loading...
