37
Always bear in mind that the safety devices prevent the engine from
starting if safety requirements have not been met. In these cases, once the situation
has been corrected, the key must first be turned back to OFF before the engine can
be restarted.
TO START THE ENGINE:
1. Open the Fuel Shut Off Valve on Fuel Cap (6) to ON.
2. Close the Engine Cover (7).
3. Use Cutting Height Adjustment Lever (2) to lift the cutting deck as high as
possible.
4. Use Blade Start / Stop Knob (12) and disengage the blades.
5. Shift the Drive Engagement (15) to neutral N.
To Next Page
Loading...
