EasyManuals Logo

Benchmark BG Series User Guide

Benchmark BG Series
62 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #30 background imageLoading...
Page #30 background image
23
4.1 STARTING YOUR GENERATOR
WARNING!
Before using the generator, a ground wire may need to be connected to
the ground terminal. The terminal is located on the front panel. Before
using the ground terminal consult a qualified electrician.
Note
Do not push the choke knob to the START/CLOSED position when the
engine is hot or ambient air temperature is high.
If recoil starting, return the starter grip slowly by hand, do not let it snap
back.
If there is no electric-start battery in the generator or the battery has
died, the generator can only be started using the recoil method. If there
is a battery and it is drained, running the generator will recharge the
battery.
4.1.1 REMOTE START
1. Rotate the fuel valve to the OPEN position.
2. Push the power switch to the ON position.
3. Wait for the Remote Start Ready light to turn on.
RUN
START
1 2 3
4
5 6
OPEN
1 2 3
4
5
OPEN

Other manuals for Benchmark BG Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Benchmark BG Series and is the answer not in the manual?

Benchmark BG Series Specifications

General IconGeneral
BrandBenchmark
ModelBG Series
CategoryPortable Generator
LanguageEnglish

Related product manuals