Name: Benchmark BW Series
Brand: Benchmark
Rating: 4 (1 reviews)

To Next Page

To Previous Page

BW SERIES

6. Replace either ﬁlter if it is damaged.

NOTE

 Running the engine without the air ﬁlter will quickly degrade the engine

 Always inspect air ﬁlter before using the pressure washer. Check and

clean the air ﬁlter according to the maintenance schedule.

3.2 REPLACE THE TEMPORARY PUMP OIL DIPSTICK

Your pressure washer ships with a red non-vented oil ﬁll plug. Before starting the

pump replace the red non-vented dipstick with the included vented oil ﬁll plug.

3.3 CHECK PUMP OIL LEVEL

1. Loosen the pump oil dipstick located on top of the pump.

2. To accurately read the oil level insert the dipstick into the hole without

threading it in. Ensure the reading is between the minimum and maximum ﬁll

lines.

3. Replace pump oil dipstick and tighten.

Air Filter

Housing

Foam Air

Filter

Paper Air

Filter

Wing Nut

Other manuals for Benchmark BW Series

Questions and Answers:

Need help?

Do you have a question about the Benchmark BW Series and is the answer not in the manual?

General