Benchmark BW Series User Manual

18
BW SERIES
4.2 STOPPING THE ENGINE
Normal Operation
1. Engage the safety on the spray wand trigger.
2. Turn the engine power switch to the OFF position.
3. Turn the fuel lever to the CLOSED position.
4. Turn o the water supply. Unlock the safety of the spray trigger and
depressurize the system by squeezing the trigger until the water stops
flowing. Then flip the safety lock back to the locked position.
5. Unplug all hoses.
Emergency Stop (All Models)
1. To stop the engine in an emergency, turn the power switch OFF immediately.
Note
 Make sure the fuel valve and engine switch are in the OFF position when
stopping, transporting, and storing the pressure washer.
1 2 3
4 5

Benchmark BW Series Specifications

General

Brand	Benchmark
Model	BW Series
Category	Pressure Washer
Language	English