7
3. PRE-OPERATION CHECK
These quick checks should be done each time the pressure washer is started to
ensure you get the most out of your pressure washer.
Set the pressure washer on a level surface and the power switch to OFF.
WARNING!
Exhaust gas contains poisonous carbon monoxide. Never run the pressure
washer in an enclosed area. Be sure to provide adequate ventilation.
Operate the pressure washer on a level surface. If the pressure washer is
tilted, fuel spillage may result. Keep away from rotating parts while the
pressure washer is running. The pressure washer is air-cooled and may
be damaged if ventilation is inadequate.
3.1 PREPARE THE AIR FILTER
Prepare the air filter before your first use. Check the maintenance schedule for a
complete cleaning guide.
1. Loosen the nut and remove the air filter cover. Remove the air filter housing
and elements and inspect for cleanliness.
2. Gently shake the paper filter or blow with air to remove the dust and debris.
3. Clean the foam air filter with soap and water or solvent and let dry.
4. Soak the foam filter in clean engine oil.
5. Gently squeeze and then pat out all excess oil and reinstall. If excess oil
remains in the foam filter it can seep through to the paper filter and damage
it.
Air Filter
Housing
Foam Air
Filter
Paper Air
Filter
Wing Nut
To Next Page
Loading...
Need help?
General
